Magnetic Powder Brakes and Clutches Operation Procedures

Direct current (DC) power is used for several times in the magnetic particle brakes and clutches produced by our company.WLKThe Xing Wenliu power supply is a specially matched power supply with magnetizing current less than or equal to1ANo Chinese content provided, original return: "的配"WLK-1A,Greater1APlease provide the Chinese content to be translated.WLK-3AOrWLK-5A.

Magnetic powder brakes and clutches often cause the magnetic powder to accumulate in one place during transportation, sometimes resulting in a "stuck" situation. In such cases, simply flipping the brake or clutch assembly to disperse the magnetic powder, or using a lever to pry it apart, is sufficient.

Prior to use, the machine should be run-in and initially powered through.20%After running at rated current for a few seconds, power is disconnected and then reconnected, repeated several times.CZ-50The magnetic powder brake's magnetic powder can be added gradually into the hanging ring hole during the磨合 process.

Water-cooled magnetic particle brake and clutch are immediately flushed with water (water pressure is)0.3MPA）,Available for natural cooling with fan cooling, but the surface temperature must not exceed60℃。

Next time, we'll discuss the reasons that can lead to a magnetic particle brake "sticking." Tech hotline:13615227229