HL Type Walnut Shell Filter

HL Type Walnut Shell Filter

Features
1. Utilizes filter backwash without requiring a gas source, featuring low operating costs.
2. The filter material has excellent oil resistance, requiring no replacement; only a 10% replenishment is needed annually.
3. Flexibly adopt series or parallel operation based on the effluent requirements.

Application Scope
Filters primarily used for oilfield and other oily wastewater treatment, utilizing walnut shell as the filter medium with strong adsorption capacity, stable chemical properties, high strength, and good wear resistance. They can be used singly or in series to ensure the quality of the effluent.

Model Description

Specification and Technical Parameters

Flow Rate: 10~180 m³/h
Design Pressure: 0.6 MPa
Operating Temperature: 5~75°C
Backwash Duration: 8~10 mins
Working Inlet Water Pressure: >0.3 MPa
Pre-filtration Water Quality Requirements:
Oil Content ≤ 120 mg/L
SS content ≤ 30 mg/L
Filtered Water Quality Standards:
Primary Treatment: Oil Removal Rate: 93%
Oil Content: ≤10mg/L
SS Content: <5mg/L
Secondary Treatment: Oil Removal Rate: 65%
Oil Content: ≤5mg/L
SS Content: <3mg/L