What are the four key points to note when operating a horizontal spindle round table planer?

The horizontal boring and turning grinding machine is mainly used in industries such as automotive, bearing, air conditioning, hydraulic, and refractory materials. When operators are handling the machine, they must pay attention to the following issues:

Firstly, ensure that all lubrication points are adequately coated with lubricating oil before starting the machine tool.

Secondly, ensure the balance when installing sand bricks or sand wheels.

Thirdly, ensure that the workpieces to be processed are placed neatly on the electromagnetic chuck, without any stacking or inclining.

Fourth, adjust the position and angle of the grinding head according to the grinding pattern of the workpiece to be tested.

To determine the left or right tilt direction of the abrasive wheel shaft, when the workpiece pattern is a single-rib arc line, and this arc line aligns with the edge arc line of the abrasive wheel on the right, it indicates that the abrasive wheel shaft is tilted to the right. If the single-rib arc line aligns with the edge arc line of the abrasive wheel on the left, it signifies that the abrasive wheel is tilted to the left. When the abrasive wheel is perfectly perpendicular to the electromagnetic worktable, meaning the abrasive wheel face is parallel to the workpiece face, a cross-hatched arc line pattern appears.