详情描述

Imported pneumatic small high-pressure ball valves (imported pneumatic three-piece high-pressure small bore ball valves, imported pneumatic gas station high-pressure ball valves, imported pneumatic...316LSocket ball valves, imported high-pressure socket ball valves, imported pneumatic焊接管 socket ball valves

Imported pneumatic small high-pressure ball valve is a dual(Single)Actuator with pneumatic piston and importedBKHHigh-pressure ball valve assembly, a new type of valve for automatic control and remote control. Widely used in high-pressure pipelines such as gas stations and tanker trucks, its connection type includes internal threads.(G/NPT)Welding, sleeve joints, etc. Pneumatic piston actuators are made with low-friction materials, and the inner and outer surfaces of the cylinder body are treated with hard anodic oxidation for corrosion resistance, significantly extending the cylinder's service life.

Working Principle

 Once the pneumatic actuator is connected to the circuit and the system air source, air flows through the管道AOrBPlease pipe in.AVessel(BVessel)Push the piston to move in one direction, thereby rotating the shaft and ball core.90°；

Pneumatic actuator top connected to a visual indicator; when the green sign points to "Open," the valve is activated.

The indicator light on the responder is green when the valve is in the open position, and red when it is in the closed position.

Locator with adjustable valve pipeline flow

Pneumatic actuator main technical parameters

Model:GTSeriesOATSeries (Single-acting, Double-acting)

Gas Source Pressure:0.4 ～ 0.8 MPa

Maximum Rotation Angle:90°～92°

RepeaterAC220V  AC110V  DC24V

Control Signal: Electrical Signal0～0Ma  4 ～20Ma Gas Signal:0.02 ～0.1 MPa

Controlled Gas Source: Clean, Dry Compressed Air

Operating Temperature:-20℃ ～ +90℃

Valve body main component material

Valve Body:A105、F304/316、F22Pending

Sphere:F304/316、F22Please wait

Valve Seat: Polyoxymethylene, PEEK

Imported pneumatic small high-pressure ball valve main performance specifications and technical parameters:

Nominal Bore Size:DN6～100mm

Nominal Pressure:PN0～70MPa

Temperature Range:-40℃～150℃

Application Scope:Water, oil products, steam, gases, gas, and certain corrosive liquids

Connection Methods: Internal Thread, External Thread, External Thread with Swivel Weld Nipple, Fitting, Welding, etc.

Select the following accessories based on different controls and requirements:

Cutting Attachments: Single electric control solenoid valve, double electric control solenoid valve, limit switch feedback sensor.

Adjustable Accessories: Electrical Positioners, Pneumatic Positioners, Electrical Transformers.

Gas Source Treatment Accessories: Air Filter Regulator, Gas Source Treatment Triple Assembly.

Manual Mechanism: Manual Operating Mechanism

Note: Prices may vary due to different operating conditions and customer requirements; please refer to the agent's quotation for specifics.