详情描述

Wall Cutting Machine AY-800 Concrete Reinforcement Cutting Wall Machine

Concrete reinforcing bar cutting wall machine is suitable for cutting or sawing grooves in reinforced concrete walls, brick walls, or stone materials, etc.

Concrete reinforcing bar cutting wall machine repair and inspection

Urgent: Do not plug in the power before checking the machine.

Here is the translation: - 本 (If there is no Chinese content provided, it remains unchanged.)MachineCumulative working time exceeds24Hour(s)  Clean and maintain the machine. Particularly ensure the lubrication and smooth operation of the lifting screw rod machine's lifting rod (no mud or debris allowed, as this aids in operation; otherwise, it may damage the machine.)

1Inspect saw blades

Reduce cutting efficiency with worn-out blades and avoid motor overload; timely replace the blade arrow.

2Inspect the wheel

Inspect the base underneath16Wheel only, is it seized or malfunctioning?,The wheel and track gap must not exceed0.2mmLoosen the wheel fixing nut, and adjust the corresponding hex set screws on both sides of the base.

3Regular inspections

Monthly inspection: The parallelism between the blade's travel direction and the track, and the distance between the leading edge of the blade and the track, must not exceed1 mm,Otherwise, when cutting, the concrete may jam the blade, reducing cutting efficiency..If not parallel, use6mmLoosen the hexagon wrench from the center seat.4Double-speed box fixing screws.Adjust the parallelism of the tuning cone saw blade.

Market Outlook for Concrete Reinforcement Cutting Wall Machines

Drilling without cutting through walls is a waste of resources. Market cutting prices are at180-300Yuan/rice 【For instance, the circumference of a door is】6Rice, pre-cut prices available900-1800Between RMB 1,000 and RMB 10,000], generally2It takes just a few hours to handle. Door opening, window opening, floor cutting, and beam cutting are all possible.