详情描述

Belt Wire Rope Head剥皮机, Stripper Machine, Explosion-proof Electric Peeler

Function: Preparatory work for vulcanization joints of steel wire rope core conveyor belts.

Features:

1. No need to flip the belt, as the rubber covers the steel wire both above and below.Clearance Can be completed in one go.

2. The thickness of residual adhesive on the steel wire can be arbitrarily controlled to ensure vulcanization strength.

3.3. Compared to traditional manual deheading methods, it is more user-friendly, saving a significant amount of time, and greatly reducing labor intensity.

Application Fields:

Power plants, mining, steel mills, ports, petrochemicalsThe Head剥机 system is designed for the tightening and cleaning of the adhesive layer attached to the outside of the steel wire rope core sheath of the conveyor belt head during the preparation of belt joints. This operation can be used in various settings and locations.

2. The剥头机 system includes:

Cutting Equipment, Traction Equipment, and Guidance Equipment

3. Technical Advantages of Wire Rope Conveyer Head剥机

（1.） Design for easy control of residual adhesive thickness on steel wire

（2.) Mechanical operation significantly enhances the appearance integrity of each steel wire, making it directly applicable for vulcanization processes.

4. Easy to operate:

（1.) Typically, a team of 2 is sufficient to operate

（2.) No need to flip the belt; the top and bottom covers can be sealed in one go.Clean up Compared to traditional manual deheading operations, deheading speed is generallyIt takes 2 to 3 hours to strip a wire connector.  Enhance work efficiency and reduce labor intensity.

The剥头机part is suitable for an inclination angle compared to the traditional manual stripping method.Steel wire ropes with diameters ranging from 4.9mm to 12.5mm, with rubber cover thicknesses up to 12mm on the running surface and 25mm on the load-bearing surface.

Usage Instructions:

Remove approximately 15 cm of steel wire from the end of the wire rope for stripping. Remove both rubber sheaths and secure the tape.

2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolts, press down the handle, and move the motor frame through the steel wire rope connection. This drives the blades to detach the rubber from the wire rope, completing the stripping process.

Wire Rope Head Stripping Machine Technical Specifications:

Wire Rope Conveyor Belt Head剥机

Model:ZX-BTJ

Voltage:380V    50Hz

Power:3KW

Weight:96kg

Application Scope:Wire rope conveyor belts in various widths from 650mm to 2200mm.