详情描述

AY-BTJ Wire Rope Core Stripper, Layered Tape Peeler, Explosion-proof Electric Stripping Machine

Function: Preparatory work for vulcanization joints of steel wire rope core conveyor belts.

Features:

1. No need to flip the belt, as the steel wire is covered with rubber on both top and bottom.Clean up Can be completed in one go.

2. The thickness of residual adhesive on the steel wire can be arbitrarily controlled to ensure vulcanization strength.

3.3. Compared to traditional manual peeling methods, it is more user-friendly, saving a significant amount of time and greatly reducing labor intensity.

Application Fields:

Power plants, mining, steel mills, ports, petrochemical plantsThe head stripping system is designed for securing and cleaning the adhesive layer attached to the steel wire rope core sleeve on the leading edge of the conveyor belt during the preparation of belt joints. This operation can be used in various situations and locations.

2. The剥头机 system includes:

Cutting equipment, traction equipment, and guidance equipment

3. Technical Advantages of Wire Rope Conveyor Head剥机

（1.） Design for easy control of residual adhesive thickness on steel wire

（2.) Mechanical operation significantly enhances the appearance integrity of each steel wire, making it directly applicable for vulcanization processes.

4. Easy to operate:

（1. Typically, two people are sufficient to operate.

（2.) No need to flip the belt; the top and bottom cover gaskets can be replaced in one go.Clear out Compared to traditional hand peeling operations, the peeling speed is generallyIt takes 2 to 3 hours to strip the wire ferrule.  Enhance work efficiency and reduce labor intensity.

The剥头机part is suitable for inclinations compared to traditional manual剥头methods.10-25mm steel wire ropes, with rubber thickness up to 12mm on the running surface and 25mm on the load-bearing surface, diameter ranging from 4.9mm to 12.5mm.

Usage Instructions:

Remove approximately 15 cm of steel wire from the end of the steel wire rope剥离胶带。剥去 both sides of the rubber sheath，secure the tape.

2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolts, press down the handle, and move the motor frame through the steel wire rope connection. This drives the blades to detach the rubber from the steel wire rope, and the stripping process is complete.

Wire Rope Head剥皮机 Technical Specifications:

Wire Rope Conveyor Belt Head剥机

Model:ZX-BTJ

Voltage:380V    50Hz

Power:3KW

Weight:96kg

Application Scope:Wire rope conveyor belts in various widths from 650mm to 2200mm.