0.75 kW electricBelt剥 PeelLayer machine

Separation of coverings on conveyor belts, such as fabric cores, wire rope cores, between the covering and canvas, between the covering and wire rope, and between canvas layers.

Standard Conveyer Belt Peeling Machine Technical Specifications:

Power, Voltage: 380V 50Hz

2. Power: 0.75 Kw, 1.1 Kw, 1.5 Kw

3. Weight: 32 kg

4. Application Range: EP, NN, cotton duck, and various layered conveyor belts with joints, in widths ranging from 650mm to 2200mm.

Features of Standard Belt Peeler:

1. Large stripping area and rapid speed significantly reduce labor intensity and minimize the time needed for joints.

2. Lightweight for easy carrying and handling.

3. Stable operation.

How to Use a Standard Conveyer Belt Peeling Machine:

1. Align the conveyor belt in the conventional manner, and then cut the corresponding joints with a knife to separate the layers.

2. Place the conveyor belt uncoiler in the proper position and secure it with a steel wire rope.

3. Power on.

4. Clamp the separated layers together with a fixture, start the motor, and use a blade to score the剥离 part at the appropriate location.

5. After the layer has been peeled off, repeat the above relevant steps to peel off separately.

2nd, 3rd, etc.

Cautionary Notes for Standard Conveyor Belt Peeling Machine Use:

1. Power connection must be performed by a qualified electrician.

2. Secure the剥头机 during use to prevent slippage.

3. Do not exceed the specified width during stripping.