Coal Dam Plate, Sealed Material Channel Coal Dam Plate, Belt Conveyor Double Layer Overflow Flap

Coal Retaining Skirt, Sealed Material Guide Chute Coal Retaining Skirt, Belt Conveyor Double Layer Overflow Guard

Skirtboard Material:

Composed of a composite of polyurethane and natural rubber, the part in contact with the belt (which serves the primary sealing function) is made of polyurethane. The polyurethane is made with high-quality imported powder.

Cast for superior wear resistance over extruded products, offering extended lifespan without damaging the belt.

2. Seal Effectiveness:

Anti-spill apron utilizes a double-layer sealed integrated structure of flat plate + apron edge, the flat plate tightly adheres to the side of the guide material channel, and the bottom contacts the belt to prevent material overflow; the apron

The outer edge flips up and can rotate within a certain angle, maintaining tight contact with the belt due to the rubber plate's resilience and automatically tracking the belt. Excellent sealing performance.

3. The skirtboard's sealing edge features a single-sided arc transition, ensuring that the belt will not be damaged or the skirt edge injured during misalignment, and it can automatically return to its original position.

4. Each side skirt board of the material guide channel is made as a single unit, matching the length of the guide channel, to prevent air leakage at the seam.

2. Product Technical Features

1. Overflow skirt board thickness: 15-25mm.

2. Overflow skirt board width: 150mm - 300mm.

3. Overflow skirt board length: Same as the feed channel, as per on-site requirements

4. Shelf life: 12 months.

Quickly secure the skirt panel with angle aluminum and clamps:

1. Corner aluminum (40mm x 40mm) is one-time formed, material: solid aluminum, with a beautiful appearance, rust-free, and its top is a round column, securely locked in the clamp.

Inside, non-shedding.

2. The clamp base is welded to the outer side of the material guide channel, with the slide deeply inserted into the base, allowing the clamp to move appropriately left and right along the base.

3. Rotate the manual tightening handle and push it all the way down (up) when appropriate, applying sufficient pressure to the diagonal aluminum to maintain the skirt panel position, while ensuring the tightening handle is securely engaged.

May loosen and fall off.

4. The clamps are hot-dipped galvanized, lightweight, and have excellent corrosion resistance, preventing rust.

5. The fastening bolts are made of stainless steel 304 material, rust-proof, suitable for use in dark, humid environments, and even brief water rinsing conditions.