详情描述

Material Guide Chute Seal Overflow Skirt  Clamp  200*18 Coal Mine Coal Retaining Plate

YThe type overflow skirt is a double-layer structure, installed at the lower edge of the conveyor belt guide trough with a quick clamping device, used for sealing between the conveyor belt and the guide trough.

1Double-sealed design; the inner layer prevents material overflow, while the outer layer inhibits dust from飞扬.

2The area in contact with the belt is compounded with a wear-resistant polyurethane layer, ensuring a long service life without damaging the belt.

3Overflow skirt board quick-tightening device, for easy and quick installation adjustment.

Reason for choosing the item:

Currently, the sides of most feed chutes are sealed using standard rubber strips cut to size, which are then fixed to one side of the chute with angle irons and locking devices. The rubber strips have poor wear resistance and become significantly worn after some use, leading to a lack of tight contact with the belt surface, creating gaps. Ultimately, this results in material spillage and affects the surrounding environment.

Product Features:

　&﹟160;1Skirtboard Material:

Composed of a composite of polyurethane and natural rubber, the part in contact with the belt (primarily serving the sealing function) is made of polyurethane. The polyurethane is cast using imported powder, offering superior wear resistance and a longer service life compared to that made using extrusion technology, without damaging the belt.

　　2Sealing Effect:

The overflow skirt board is constructed with a double-layer seal of a flat plate and skirt edge, where the flat plate is tightly adhered to the side of the guide slot, contacting the belt at the bottom to prevent material overflow. The skirt edge is flipped out and can rotate within a certain angle, relying on the rubber plate's elasticity to automatically track the belt and maintain a tight contact, offering excellent sealing performance.

　　3The skirt board's sealing edge features a single-sided arc transition, which prevents damage to the belt and skirt during belt misalignment and allows for automatic restoration to its original position.

　　4The side skirt panels of the material guide are made as a whole according to specifications, matching the length of the material guide to prevent air leakage at the joint.

Standard dimensions of the item:

Width:100mm—400mm &﹟160;&﹟160;&﹟160;&﹟160;&﹟160;Thickness:10--20mm