详情描述

Hanging type grinding wheel machine MC3140  Suspended grinding wheel machine  Casting burr processing polishing machine

Suspension type grinding wheel machine, also known as hanging grinding wheel machine, mainly used for grinding cracks, embedded carbon, burrs, etc. on stainless steel, titanium ingots, alloy steel, special steel, steel ingots, and various metals.

Check the hanger for stability before use; used for grinding stainless steel, titanium ingots, and alloy steel.

Operation Procedure:

Ensure the hanging item is securely fastened before use.

2. Upon initial use, first observe if the motor is reversing. Normally, the grinding sparks should be ejected towards the motor. If not, shut down the machine immediately to check if the circuit is functioning properly.

3. After the grinding wheel machine is started, it should be operated at a stable rotation before grinding. If the machine exhibits significant vibration, it should be stopped and adjusted immediately.

4. Avoid excessive force during grinding.

5. Select a grinding wheel that matches the spindle speed of the grinding machine, as per the manufacturer's instructions.

6. New abrasive wheels must have a factory-certified quality certificate or a test mark. Do not use the wheel if any defects such as quality issues, hardness, particle size, or cracks are found before installation.

7. When installing the grinding wheel, the clearance between the inner hole of the wheel and the main shaft should not be too tight. It should be adjusted according to the technical requirements for loose fit, generally between 0.05 and 0.10 millimeters.