2250 Model Flip-Top Sanding Belt Machine, Electric Polishing Machine, Tip-Changeable Polishing Machine

2250 Type Flip-Over Belt Sander Electric Polishing Machine Point-Interchangeable Polishing Machine

Grinding, deburring, cleaningThe dust-removing grinding wheel machine is primarily used in industrial and mining enterprises for sharpening cutting tools, and can also be used for grinding, deburring, and cleaning of small parts.

2 Low environmental requirements.Dust-removing Grinding Wheel MachineCan be used at altitudes of not more than1,000 meters, surrounding air relative humidity not exceeding 90%            High environmental temperature not exceeding40°C humid tropical region.

High dust removal efficiency                                                                      The machine employs bag dust removal technology, achieving an efficiency of over 98% and dust concentration less than 10 mg/m³. Compliant with the Ministry of Labor and Human Resources and the Ministry of Environmental Health of the country.                                                                      Regulations for excellent vacuuming performance                              Labor environment Operators are free from dust exposure.

Use indoors only. Dustless grinding wheels are not resistant to chemical corrosion and must not be used outdoors.

Section 2: Technical Specifications of the Grinding Wheel Machine

Section 3: Instructions for Use of the Grinding Wheel Machine

Grinder before use                  Please provide the Chinese content to be translated.Megohmmeter measuring insulation resistance above 500 volts, with a value not less than 0.5 megohms.

2. Thoroughly inspect the grinding wheel before use to check for any damage or cracks due to transportation. Pay special attention to any cracks in the grinding wheel. Gently tap it with a wooden mallet; a clear, crisp sound indicates the item is in good condition.

3.Dust Removal Grinding Wheel MachineBefore use, manually rotate the shaft extension to check for smooth, easy movement and listen for any rubbing noises.

4. The direction of rotation for grinding wheels and fans should align with the direction indicator.

5. Do not allow the workpiece to collide with the grinding wheel during operation.                  Gradually apply pressure to prevent the grinding wheel from being impacted, thereby avoiding explosion and accidental incidents.

6. Grinding Wheel MachineProtective cover, replacement of grinding wheelIn addition to disassembly and maintenance, it is strictly prohibited to dismantle under normal circumstances.                                                                      。

7. Using two medium-grit grinding wheels, the difference in their diameter wear is observed.            No larger than20%。

8. During operation, the grinding wheel machine should always produce a normal sound. If a screech, a whirring noise, or any other unusual sound occurs, the machine should be immediately stopped and the cause of the noise should be inspected until it is resolved before resuming use.

9. When more dust accumulates in the filter bags of the grinding wheel machine, it affects the air intake of the fan. Therefore, it is necessary to regularly open the front door, remove the dust bag, and pour out the dust inside.