详情描述

Dual-Station It-Driven Grinding Wheel Machine, Explosion-Proof Grinding Wheel Machine for Foundries, Belt Drive Grinding Wheel Machine

 1.Floor-standing grinding wheel machines are mainly supplied to general industrial and mining enterprises for grinding common small parts, deburring, and casting cleaning tasks.,Also suitable for sharpening common cutting tools.

 2.The pedestal grinding wheel is not resistant to chemical corrosion and should not be used outdoors.

Two.Utilization and Maintenance

Grinding wheel machine before use                  Please provide the Chinese content you would like translated into American English.Megaohmmeters above 500 volts are used to measure the insulation resistance, which must be no less than 0.5 megaohms.

2. Prior to use, the parts of the grinding wheel machine should be thoroughly inspected for any damage or cracks due to transportation, and check for loose fasteners; if any are found, they should be tightened.  Ensure proper tension. Pay special attention to the absence of cracks in the grinding wheel. Gently tap with a wooden mallet; a clear, crisp sound indicates it is safe to use.

3. Prior to use, the grinding wheel machine should be manually rotated to check for smooth, easy movement and listen for any grinding or rubbing noises.

4. The direction of rotation for grinding wheels and fans should match the rotation indicator.

5. Do not allow the workpiece to collide with the grinding wheel during operation.                  Gradually apply pressure to prevent the abrasive wheel from being subjected to impact forces, thus avoiding an explosion and potential accidents.

6. The abrasive wheel guard is strictly prohibited from being removed except for replacing the abrasive wheel and for maintenance and disassembly.                                                                      。

7. Two grinding wheels on a medium-grit wheel machine have a difference in their wear diameter.            No larger than20%。

8. Replace with a new grinding wheel. Ensure it is balanced during installation, and the soft pad between the grinding wheel and the mounting plate should be securely in place. Do not tighten the nut too much to prevent the grinding wheel from cracking.            After                  Secure the protective cover.

9. The lubricant in the bearings should generally be replaced every six months.

10. The vertical grinding wheels, M3030, M3035, and M3040, are equipped with a worktable. When using the worktable, ensure that its support surface is at the same height as the motor's shaft centerline. After adjusting the height of the worktable,                  Secure tightly.

11. The grinding wheel machine should not be exposed to dampness or freezing during storage to prevent cracking of the insulating surface, which may affect the normal operation of the machine.