Low-profile Dual-Speed Polishing Machine, Dual-Station Electric Polishing Machine, High-Power Electric Grinding Wheel Machine

Low-profile Dual-Speed Polishing Machine, Double-Station Electric Polishing Machine, High-Power Electric Grinding Wheel Machine

Grinding, deburring, and cleaning. Dust-removing grinding wheels are mainly used in industrial and mining enterprises for sharpening cutting tools and can also be used for grinding, deburring, and cleaning of small parts.

2. Low environmental requirements.Dust-extraction Type Grinding Wheel MachineCan be used at altitudes not exceeding1000 meters, surrounding air relative humidity not exceeding 90%            High environmental temperature not exceeding40℃ Wet Tropical Zone.

High dust removal rate                                                                      This unit utilizes dust removal bags, achieving a dust removal efficiency of over 98% with dust concentration less than 10 mg/m³. Compliant with the Ministry of Labor and Human Resources and the Ministry of Environmental Health.                                                                      Regulations for excellent vacuuming performance                              Labor environment Operators are free from dust exposure.

Use indoors only. Dust collector grinding wheels are not resistant to chemical corrosion and should not be used outdoors.

Section 2. Technical Specifications of the Grinding Wheel Machine

Section 3: Instructions for the Use of the Grinding Wheel Machine

1. Grinder before use                  Please provide the Chinese content you would like translated into American English.Mega-ohmmeters over 500 volts are used to measure the insulation resistance, which must be no less than 0.5 megaohms.

2. Thoroughly inspect the grinding wheel before use to check for any damage or cracks due to transportation. Pay special attention to the wheel for cracks, and gently tap it with a wooden mallet; a clear, crisp sound indicates the item is in good condition.

3.Dust Removal Grinding Wheel MachineBefore use, turn the shaft extension by hand to check for smooth and quick movement, and listen carefully for any rubbing sounds.

4. The rotation direction of grinding wheels and fans should match the direction indicator.

5. Do not allow the workpiece to collide with the grinding wheel during operation.                  Gradually apply pressure to prevent the grinding wheel from being subjected to shock forces, thereby avoiding explosion and accidental incidents.

6. Grinding Wheel MachineProtective cover, replacement of grinding wheelIn addition to removal for maintenance and disassembly, removal is strictly prohibited under normal circumstances to ensure safety.                                                                      。

7. Two grinding wheels used on a medium sandwheel machine have a difference in wear diameter.            No larger than20%。

8. During operation, the grinding wheel machine should always produce normal sounds. If squealing, humming, or other noises occur, the machine should be stopped immediately to investigate the cause of the noise, and it can only be used again after the noise is eliminated.

9. Use fabric bag dust removal for the grinding wheel machine. As more dust accumulates in the fabric bags, the wind volume of the fan decreases. Therefore, it is necessary to regularly open the front door, remove the dust bag, and empty the dust inside.