详情描述

Electric Single-Sided Plow-Type Discharge Device DTII02F13/B=650 Coal Plow

DYTLXThe electric-hydraulic automatic balancing scraper unloader is powered by an electric-hydraulic push rod, which drives the extension of the push rod to lower the scraper blade. Then, through a linkage mechanism, the lifting roller assembly is raised simultaneously, ensuring the scraper blade's lower edge is tightly sealed against the belt surface, allowing materials on the belt to be unloaded into the designated area. After unloading is complete, the push rod retracts, lifting the scraper blade, while the lifting roller assembly descends through the linkage mechanism, allowing the material to pass smoothly. The product features include:

aMost structures utilize mechanical connections, particularly linkage mechanisms, which relatively reduces friction and extends the service life (up to)5-10Annual (no replacement required);

bDriven by electro-hydraulic push rods, it overcomes the shortcomings of electric push rods, such as poor overload capacity, tendency to overheat motors, and easy bending of ball screws.

cThe plow blade of the main plow and the flip door of the lock gas funnel are both made of high-chromium manganese.Friction-resistant Materials, small plow headsAbrasion-resistantGlossy plate made, significantly reduces maintenance workload, thereby saving costs.

YAYLCThe Self-Controlling Dust Removal and Discharging Device (Heavy Discharging Truck) is designed based on the absorption and integration of advanced technologies and experiences from both home and abroad. It can be widely used in industries such as metallurgy, mining, power, coal, building materials, and refractory materials. Its main structural features are:

1The main drive unit is equipped withYEJType-built motor, turbine worm reducer, and the transmission mechanism it comprises are simple in structure, highly efficient, easily adjustable, and operate smoothly.

2Adopt      Conducting line power supply unit, ensuring reliable power supply without distance limitations.

3The overall layout of the unloading system is reasonable, with the main drive wheel having a high wheel pressure, which eliminates the slipping phenomenon during startup. The movement is smooth, and the stopping position is accurate and reliable; there will be no displacement of the unloading vehicle due to the high tension of the belt.       At times, the material can run in the direction of the conveyor belt or against the direction of the conveyor belt.

4The directional roller is made of high-strength material, capable of withstanding greater belt tension.

5The frame structure is reasonable with good strength and rigidity.

6The funnel chute is lined withAbrasion-resistant         Liner, long-lasting.

7The discharging ports of the factory are sealed with tape to minimize dust pollution, and designated material outlets are sealed with dust covers. These methods effectively reduce dust contamination, and the addition of exhaust ventilation and dust removal from the storage silo can enhance the effect even further.