详情描述

Electro-hydraulic Swing Gate (Valve) Coal Bin Arch-type Deslagging Valve

Lip gates are suitable for bulk density≤2.5t/m3A variety of bulk materials such as ores, coal, coke, slag, and chemical products, widely used in the bottom discharge of warehouses for construction materials, metallurgy, chemicals, glass, and other industries.
Structural Features:
  The hood gate is made of carbon steel welded into a unique structure, which operates flexibly and reliably with no jamming. It can be paired with different transmission devices to meet various operational requirements. The electric hood gate features an electric actuator with overload protection to prevent motor burnout, allowing for remote operation or programmable control. The reciprocating stroke can be adjusted for position locking. The electro-hydraulic hood gate uses an electro-hydraulic actuator with full hydraulic transmission, enabling variable speed control for both pushing and pulling forces. The pneumatic hood gate is equipped with a pneumatic actuator, which can be remotely controlled or locally controlled through component assembly.SEFFor manual,DEFFor electricYEFFor electro-hydraulic driveQEFPneumatic.
Performance Parameters:
 

Applicable Temperature(℃)

Bulk Densityt/m3）

Applicable Medium


≤300

≤2.5

Crystalline solids, coal, coke, slag, chemical products, and various ores











Operation Principle:
      The gate valve consists of components such as the main body, wing-shaped gate plate, shaft, gears, sealing pairs, and actuator. By manually operating or actuating the lever, the gears are driven to rotate the wing-shaped gate plate around the shaft axis, causing the two plates to open to the sides, allowing materials to fall. After the receiving device is fully loaded, the actuator moves the lever to reset the wing-shaped gate plate, closing the material cutoff.
Instructions for Use:
l        Please note the medium flow direction indicated on the gate body during installation. When connecting the two flanges, it is essential to add a sealing gasket, then tighten the bolts evenly.
l        Ensure you identify the correct direction of the butterfly valve switch during operation, and properly connect the actuator's wiring.
l        Please regularly lubricate all transmission parts during operation.