详情描述

WALL DEMOLITION MACHINES, WALL CUTTING MACHINES, REINFORCED CONCRETE DOOR AND WINDOW OPENING MACHINES

Wall cutting machineZX-800

Voltage:220V-
Frequency:50-60Hz
Power:6680W
Using saw blades:12〞-32〞，300mm-800mm
Cutting Depth: 320MM, suitable for cutting or grooving reinforced concrete walls, brick walls, or stone materials, etc.

Wall cutting machines are primarily used for building or renovation projects, reinforcement, and design alterations, capable of cutting large areas of walls such as door and window openings or elevator shafts.AnyuanThe wall cutting machine maintains structural integrity with a single molding process, not only avoiding damage to the building structure caused by traditional hammering construction methods but also reducing consumption of time, materials, and labor in drilling circular holes. It is a crucial piece of equipment in concrete production, directly affecting the entire production line's processes, layout, and the dimensions and appearance quality of the products. Our wall cutting machine boasts stable technology. Superior performance, highly praised by our dedicated customers. Shipped to  各地的 customers have become users of concrete block machine production lines.Helper。

Concrete Reinforcement Cutting Wall MachineMachine Installation

First, install the traveling track, then place the machine on the track.To achieve horizontal wall cutting, the correct installation of the track is: the motor should face up and the blade should face down. During cutting, the rotation of the blade should be as opposite to the motor's running direction as possible. This not only reduces the cutting time but also improves the cutting efficiency.

1. First, drill a hole with a hammer drill at approximately 165mm from the self-cutting point, creating a fixed expansion bolt hole with a diameter of 16.3-16.5mm and a depth of 55mm. This hole can only accommodate one M12 expansion bolt included with the machine. The track can be installed and used in any direction around the hole.

2. Clean out any small debris from the holes with an air gun.

3. Insert the M12 expansion screw provided with the machine, then tap the screw into the expansion screw hole with a mallet, and hammer it to secure the expansion screw.  Ensure that the expansion bolts are securely fastened in the holes; otherwise, the machine may move or fall during operation. Use the expansion bolts and screws, as well as the fixed guide tracks provided with this machine, and determine the number of expansion bolts based on the softness of the cutting surface. Track Secure firmly.

4. When installing the main unit, align it with the forward indicator on the unit, connect the speed controller in sequence, followed by the plug. Turn the handwheel counterclockwise, and the main unit will move along the track.

5. Insert the saw blade; the inner hole of the main unit is 35mm. Hexagon screws for securing the saw blade  Open-end wrench  Tighten.

6. Align the saw blade with the cutting line and position the travel track  Adjust the horizontal positioning screws on the track with a hex wrench, moving them up and down to level the track. This prevents the track from derailing at the joint.