Fiberglass Absorber Tower Operation Process

Fiberglass Absorption Towers, Acid Mist Absorption Towers, Waste Gas Absorption Towers, Fiberglass Purification Towers

With the development of modern industry, preventing environmental pollution has become a common concern. Meanwhile, the comprehensive utilization, converting harmful into beneficial, and waste into useful, is an important approach to saving investment, energy, and enhancing economic benefits. In many surface treatment processes of metal products (such as pickling, chemical milling, electroplating, etc.), sulfuric acid, hydrochloric acid, and nitric acid are required, leading to the release of acid mist gases of certain concentrations. When the content of these gases exceeds the standard, they can cause severe harm to human health, plant and animal growth, and buildings, thus attracting increasing attention from the state. As a result, with the assistance of relevant scientific research institutions, I have successfully developed the BJS series of acid mist purification towers. These towers are made of glass fiber reinforced plastics and polyethylene, featuring high purification efficiency, strong corrosion resistance, high strength, low noise, energy-saving, small size, easy disassembly and maintenance, and attractive appearance.

The FRP Absorber Tower is manufactured in sections. The outer surface of the tower is coated with a waterproof, aging-resistant gel coat resin as the anti-aging layer, with a thickness of not less than 0.5mm. The aging-resistant coating is made of alkali-free, wax-free, untwisted grid fine cloth between the strength layer and the inner and outer surfaces, with a resin content of not less than 75%. The layers are laid according to large-scale technical standards, with a resin content of 60~70% to ensure the tower's reliable strength.