Shandong fly ash aerated blocks, blue bricks, small blue bricks

Shandong Small Qing Brick, Qing Brick, and Shandong Fly Ash Aerated Block are made primarily from fly ash, lime, cement, gypsum, etc., with the addition of appropriate foaming agents. They are produced through processes such as batching, mixing, casting, static setting, cutting, and high-pressure steam curing. This product is a new type of wall building material, characterized by its light weight, energy-saving, thermal insulation, fire resistance, heat insulation, waste utilization, superior economic indicators, and ease of processing. It can be widely used in industrial and civil construction as load-bearing materials for walls, floors, and roof panels, as well as non-load-bearing materials or maintenance filling materials.

Shandong Fly Ash Aerated Block Features:

Bulk Density:Autoclaved Aerated Concrete BlocksLight weight, high bulk density.Absolutely dryY0 = 600-700 kg/m³, dry density is one-third that of red brick and one-fourth that of concrete. Its dry density is lighter than water, and it's known as concrete that floats on the surface.

2. Strength: Compressive strength of cubes ≥ 4MPa, single-point suspension force ≥ 1200N. As a non-load-bearing maintenance structure material, it fully meets the requirements for bending, cracking resistance, and joint strength of panels under various usage conditions, and is a lightweight, high-strength maintenance structure material.

3. Thermal Insulation: This material boasts excellent thermal insulation properties with a thermal conductivity coefficient of only 0.11-0.16 W/m.k, and also offers superior heat retention capabilities [heat retention coefficient S=2.75 W(m².k)]. With appropriate thickness, it can be used in cold regions with high thermal insulation requirements, as well as in regions with high requirements for summer warmth or winter cold, meeting energy-saving standards.

4. Sound Insulation: This material is a porous substance composed of a large number of uniformly distributed, non-interconnected tiny air pores, offering excellent sound insulation properties. A thickness of 100mm provides...Autoclaved Aerated Concrete BlocksAverage Noise Reduction Rating40dB, average noise reduction of 45dB for 150mm thick AAC panels.

5. Fire resistance:Autoclaved Aerated Concrete BlocksAn incombustible inorganic material with excellent fire resistance properties, serving as a fire-resistant board.100mm thick plate > 3 hours; 150mm thick plate > 4 hours; 50mm thick plate protective steel beam fire resistance > 4 hours; all exceed the first-grade fire resistance standard.

6. Durability: An inorganic silicate material that does not age, offering excellent longevity, its service life can be matched with that of various buildings.

7. Frost Resistance: Excellent frost resistance; after freeze-thaw testing, the quality loss is <1.5% (national standard <5%), and the strength loss is <5% (national standard <20%).

8. Waterproofing: Excellent waterproofing, 5 times better than standard bricks.

9. Softening Coefficient: High softening coefficient, Rw/Ro = 0.88

10. Eco-friendly Material: This material is non-radioactive and emits no harmful gases, making it an eco-friendly option.

11. Constructibility:Autoclaved aerated concrete blocksProduction industrialized and standardized, installation industrialized, capable of sawing, cutting, planing, and drilling, dry construction method, fast speed.

12. Compatibility:Autoclaved Aerated Concrete BlocksComplete application system with accessories such as connectors, sealants, patching powder, and primers;

13. Simple construction and low cost: This material eliminates the need for plastering, reducing costs by 20-25 yuan per square meter; it can be directly applied with putty and spray paint.

14. Excellent Surface Quality, No Cracks: This material is chosen due to its dry construction method, ensuring no hollowing or cracking on the board surface.

15. Easy Hanging Without Cracking: Ideal for hanging air conditioners, water heaters, washbasins, etc., with simple installation and easy handling.Autoclaved Aerated Concrete BlocksScientific and rational node design and installation methods ensure the wall's stability and safety in the plane, while its planar mobility through the wall panel allows for significant horizontal displacement adaptation. This guarantees that the building's maintenance structure will not sustain major damage under the impact of strong winds or seismic forces, demonstrating strong seismic resistance.In a 1:1 simulated earthquake test, following a seismic test with an intensity of 10.5 degrees (1.2g), all the panels of the tested building model remained intact without any fractures, with 120 of them.Autoclaved Aerated Concrete BlocksAll installation nodes are undamaged. Autoclaved Aerated Concrete BlocksAlreadyUsed as interior and exterior wall panels, roof panels, etc., in over 1500 domestic and international construction projects.

16. UtilizeAutoclaved Aerated Concrete BlocksCan serve as partition walls to increase usable space

17. UtilizeAutoclaved Aerated Concrete BlocksThe cost of decoration can be reduced by no less than by using aerated masonry blocks compared to traditional methods.15％

18. UtilizeAutoclaved Aerated Concrete BlocksUsing wall materials can shorten the construction period by one-third compared to using aerated bricks.

4. Sound Insulation: The material is a porous material composed of a large number of uniformly distributed, non-connected tiny air pores, offering excellent sound insulation properties. A thickness of 100 mm is available.Autoclaved Aerated Concrete BlocksAverage Soundproofing Level40dB, average noise reduction of 45dB for 150mm thick AAC panels.

5. Fire resistance:Autoclaved aerated concrete blocksMaterial A is a non-combustible inorganic material with excellent fire resistance properties, serving as a wallboard with a high fire resistance limit.100mm thick plate > 3 hours; 150mm thick plate > 4 hours; 50mm thick plate protective steel beam fire resistance > 4 hours; all exceed the first-class fire resistance standard.

6. Durability: An inorganic silicate material that does not age, with excellent longevity, its service life can match that of various buildings.

7. Freeze Resistance: Excellent freeze resistance; quality loss after freeze-thaw test <1.5% (National Standard <5%); strength loss <5% (National Standard <20%).

8. Permeability Resistance: Excellent resistance to seepage, 5 times better than standard bricks.

9. Softening Coefficient: High softening coefficient, Rw/Ro = 0.88

10. Eco-friendly Material: This material is non-radioactive and emits no harmful gases, making it an eco-friendly option.

11. Constructability:Autoclaved Aerated Concrete BlocksMaterial production industrialized and standardized, installation industrialized, capable of sawing, cutting, planing, and drilling, dry construction operation, quick speed.

12. Compatibility:Autoclaved Aerated Concrete BlocksComprehensive application accessory system, including connectors, sealants, patching powders, and primers, etc.

13. Simple construction and low cost: This material eliminates the need for plastering, reducing the cost by 20-25 yuan per square meter; it can be directly applied with putty or spray paint.

14. Excellent surface quality, no cracks: The use of this material is due to the dry construction method, ensuring that the panels do not have hollow or cracked surfaces.

15. Easy Hanging Without Cracking: Convenient for hanging air conditioners, water heaters, washbasins, etc., simple installation and easy to handle.Autoclaved Aerated Concrete BlocksScientifically rational node design and installation methods ensure the wall's stability and safety in the plane, while its planar mobility through the rotatability of the wall panels allows for significant horizontal displacement. This guarantees that the building's maintenance structure will not sustain major damage under the influence of strong winds or seismic forces, demonstrating strong seismic resistance.In a 1:1 simulated earthquake test, after undergoing a seismic test with an intensity of 10.5 degrees (1.2g), all panels of the tested building model remained intact, with none fractured. 120 ofAutoclaved Aerated Concrete BlocksAll installation nodes are undamaged. Autoclaved Aerated Concrete BlocksAlreadyUsed as interior and exterior wall panels, roof panels, etc., in over 1500 domestic and international construction projects.

16. AdoptAutoclaved Aerated Concrete BlocksServe as partition walls to increase usable space.

17. AdoptAutoclaved Aerated Concrete BlocksReducing decoration costs by no less than when using aerated masonry blocks.15％

18. AdoptedAutoclaved Aerated Concrete BlocksUsing wall materials instead of aerated blocks can shorten the construction period by one-third.