Tianjin Autoclaved Aerated Concrete Blocks – Direct Supplier Shipment

Autoclaved Aerated Concrete Blocks, Aerated Concrete Blocks, Tianjin Aerated Blocks are a type of lightweight, porous concrete material. It's a new type of building material with advantages such as low density, high thermal insulation, good sound absorption, and workability. It can be used to make wall blocks, insulation blocks, pressure plates, floor slabs, wall panels, and thermal insulation pipes. Currently, aerated concrete is widely used in China for both industrial and residential buildings, in load-bearing or non-load-bearing structures, and for pipe insulation, becoming an important part of the new building materials industry. 

With the rapid development of China's socialist construction, the construction industry has seen significant growth. Investment in infrastructure has been rising year by year, necessitating more and better construction materials to meet the needs of the industry. However, some outdated materials in China's construction sector have led to issues such as excessive waste, low production efficiency, extended infrastructure construction cycles, and heavy building weights, acting as obstacles to the industry's progress. As a result, the masonry block construction and lightweight frame building systems have experienced substantial development. The emergence of new construction materials has been significant, with the aerated concrete blocks in Tianjin playing a crucial role.

Tianjin Autoclaved Aerated Concrete Blocks Features:

1Low bulk density, which can reduce the self-weight and construction cost of buildings, and is beneficial to improve the seismic resistance of buildings.

The general density of aerated concrete is500-850pounds/cubic meters, and by weight450pounds/Over cubic meters, its weight is only as much as quite a bit of clay brick.1/4Standard concrete,1/4It is an ideal lightweight material for high-rise, super high-rise, and large-span structural buildings, using which can reduce the self-weight of the structures.1000pounds/Within cubic meters, compared to traditional building materials, the self-weight of the building can be reduced.3/5-2/3Thus, reducing the cost of construction.

2Excellent thermal insulation, low thermal conductivity

Bulk Density400-800pounds/Cubic meters of aerated concrete, with a thermal conductivity typically ranging0.08-0.15Thousand calories/Rice*Please provide the Chinese content you would like translated into American English.*Within degrees, merely for the thermal conductivity of clay bricks.1/4-1/5For ordinary cement concrete,1/5-1/10.In the north, utilize24CM thick aerated concrete block wall.Its thermal insulation effect is equivalent to49Brick wall with a thickness of centimeters.

3Processable

It is as workable as wood, allowing for sawing, planing, drilling, and nailing, which is conducive to construction and on-site operations.

4Autoclaved aerated concrete has high compressive strength.

Through experimentation, the compressive strength of the aerated blocks exceeds25kilogram/Square centimeters, equivalent to125Compressive strength of number clay bricks and fly ash bricks.

5Expanded polystyrene blocks withstand high temperatures.

Expanded polystyrene concrete at a temperature of600Below °C, its compressive strength slightly increases; when the temperature is600At around 0°C, its compressive strength is close to that at room temperature, thus the fire-resistant performance of aerated concrete as a building material meets the national first-grade fire-resistant standard.

Contact information for Tianjin Autoclaved Aerated Concrete Blocks: