Infrared High-Temperature Coating

   Xuchang Infrared Technology Research Institute Co., Ltd. is located on Yongxing East Road, High-tech Development Zone of Xuchang, Henan (Zhongyuan Electrical Valley), the predecessor of Xuchang Infrared Technology Research Institute. It is one of the influential infrared heating research institutions in China. Our institute has been1979Year10Since its inception last month, adhering to“Highlight strengths, rigorously enforce quality, strengthen service, strive to create onel”The guiding philosophy. With robust technical capabilities, a highly qualified workforce, and a spirit of innovation, the Xuchang Infrared Institute has developed and produced a series of products with national...jFirst-generation horizontal infrared products. Main products include: series of infrared radiation (absorption) coatings, infrared heating elements, infrared radiation heating modules (plates), infrared radiation heating ovens (boxes), rapid infrared radiation heaters, seriesgInfrared end heating experimental equipment, series of infrared heating controllers, etc. Infrared high-temperature resistant coatings generally refer to those that can withstand high temperatures for a long time.200Above Celsius temperature Special functional coatings that maintain certain physical and chemical properties, enabling the protected object to function normally in high-temperature environments. These coatings are filled with infrared borosilicate glass as the main filler into the resin matrix, forming a new type of infrared high-temperature resistant coating. High-temperature resistant coatings can be divided into two major categories: organic high-temperature resistant infrared coatings and inorganic high-temperature resistant infrared coatings. The coating in question is an inorganic high-temperature resistant coating. It features heat resistance, corrosion resistance, and conductivity, with inexpensive and readily available raw materials and a simple preparation process.jIt's simple. This paint is commonly used to coat high-voltage electrostatic precipitators.jBoards can extend the service life of electrostatic precipitators and improve operational conditions. Therefore, they are widely valued by departments using electrostatic precipitators in industries such as cement, metallurgy, and electricity. Infrared high-temperature coatings are inorganic monocomponent, utilizing a specially formulated solution with no odor. Temperature Resistance Range(-80-1800℃)Infrared high-temperature-resistant thermal insulation coating is available only.0.03W/m.KEffectivelyyBlock and shield the radiant heat and conduction of infrared radiationyManufacturing efficiency can reach90%ApproximatelyyThe heat radiation and heat loss of high-temperature objects, can effectively preserve the cold for low-temperature objects andyRadiation heat loss caused by the cooling environment can also prevent condensation from occurring. Infrared high-temperature resistant coatings can also serve as high-temperature adhesives, which are capable of withstanding1800℃Even higher temperatures can be used as coating materials for ceramics, glass, metals, and also as adhesives for ceramics, glass, and metals. They are widely applied in industrial fields such as metallurgy, petrochemical industry, gas extraction, aerospace, etc. When applied at room temperature on the surfaces of metals and other objects, they can dry at low temperatures or cure at room temperature, offering excellent adhesion to metals and extreme hardness, making them resistant to scraping off with a blade. Post-high-temperature firing, their strength is even more pronounced, and they do not crack, and are highly resistant to...1800High-temperature resistance, applicable to surfaces of metals such as iron, steel, aluminum, ceramics, glass, and more.

Infrared high-temperature coatings are a crucial type of paint, widely used in high-temperature motors and electrical insulation since the industrial production of silicone began in the 1940s. Silicone-based infrared ceramic glass coatings meet the requirements for corrosion resistance at higher temperatures. However, due to the poor mechanical properties, low adhesion, wear resistance, and solvent resistance of silicone itself, it is increasingly unable to meet the demands of modern motors, electrical appliances, aerospace, and special media resistance. As a result, a series of heterocyclic polymers have emerged. These polymers have been successfully applied in special high-temperature engineering plastics, molding compounds, films, laminates, adhesives, and paints. In addition to modifying the pure silicon-oxygen backbone, organic resins are also used to make them heat-resistant, radiation-resistant, oil-resistant, hydrolysis-resistant, and wear-resistant. Despite this, these new high polymers have not yet been widely used in high-temperature coatings, with the vast majority of products still in the research and development phase.

The raw materials for the preparation of coatings can be divided into three parts.:Base material, reactive pigment. React with a certain amount of reactive pigment in a ball mill, mix the base material and pigment in a specific ratio, and disperse them with high-speed stirring for about half an hour, thus obtaining the paint. Due to the use of granular pigment in the formula, it is more prone to sedimentation and agglomeration.,Adding anti-settling agents may reduce the conductive properties of the coating film. Additionally, long-term contact with acidic binders can cause a slow reaction. To avoid these drawbacks, the binder and pigments are separately packaged. They are mixed before application to achieve the appropriate working viscosity. There is no strict expiration date for the mixed paint; generally, it's best to use it the same day, but it can also be used after a few days.

After testing:High-temperature pipelines, equipment, and furnace walls(Inner and outer)Coating the surface of the container effectivelyyHeat radiation and heat loss.

1Infrared Coatings1100℃Apply coating to the surface of the object8mmThe surface temperature of the object can be reduced to100℃Within.

2On the inner and outer surfaces of the furnace kiln6mmThick infrared high-temperature heat-insulating coatings can reduce heat loss.30%Above.

3Applying it to the inner walls of furnaces and kilns results in a smoother and more reflective surface than any other material, reducing the heat absorption of the wall and increasing the flame temperature within the furnace.

4At below zero30℃The cabinet is painted10mmThick infrared heat-resistant thermal insulation coating24The temperature inside the hour case is not higher than0℃。

5Infrared coatings have zero chloride ion content, and can also prevent moisture-laden chlorides and sulfides from entering the metal surface during air or process, providing excellent corrosion protection for the metal. Additionally, they do not cause brittleness in the welds of metal joints.

6Infrared coatings can be used on chimneys, ducts, and windshields, offering excellent wear and impact resistance.

7Infrared coatings have a high insulation coefficient, offering excellent insulation properties under high temperatures.

8Infrared coatings have no odor, do not deform, and do not decompose at high temperatures.

Eco-friendly and harmless to humans.

Strong adhesion and good flexibility, suitable for coating on materials such as stainless steel, aluminum, iron phosphate, ceramics, and bamboo carbon.

Excellent high-temperature resistance; maintains luster and color stability under long-term high-temperature use.

Excellent scratch and corrosion resistance, high hardness, and good wear resistance.

Excellent continuous non-stick performance, capable of withstanding boiling water, saltwater, milk, eggs, butter, and other food materials for a long time.

Infrared high-temperature coatings can be applied to surfaces of iron, steel, aluminum, ceramics, and glass, widely used in industries such as metallurgy, petrochemicals, gas extraction, and aerospace.zHigh tolerance1400℃Even higher temperatures. Not only is it resistant to high temperatures, but also to thermal shock and abrasion. Through the coating, it can modify the surface of metals and various refractory materials, thereby enhancing the performance of the base material, while saving energy and extending the service life of the metallic matrix material.1-2Infrared high-temperature coatings have been widely used in products like electric irons, rice cookers, microwave ovens, and baking trays, offering excellent adhesion to metals and a very hard surface. After high-temperature firing, their strength becomes even more pronounced, and they do not crack, exhibiting good oil and acid/alkali resistance.XWGTModel High Temperature Infrared Radiant Coating88Named as a recommended energy-saving project in Henan Province annually, and awarded the Third Prize for Technological Progress in Xuchang City.2002In the year, we developed a nano-low-temperature infrared radiation coating.

Xuchang Infrared Research Institute will continue to focus on the research and development of infrared radiation heating technology to enhance...qEfficiency, reliability, and system lifespan, providing for you,zPure infrared heating technology solutions.