Infrared Roller Dryer Production Line

    The Xuchang Infrared Technology Research Institute Co., Ltd. is located on Yongxing East Road in the New Technology Development Zone (Zhongyuan Electrical Valley) of Xuchang, Henan. Its predecessor, the Xuchang Infrared Technology Research Institute, is one of the influential infrared heating research institutions in China. The infrared drum drying production line consists of infrared drum dryers, infrared belt conveyors, bucket elevators, and other equipment. Wet materials to be dried on the infrared drum drying production line are transported to the drum dryer hopper by the belt conveyor or bucket elevator, and then fed into the dryer's feeding end through the feeding pipeline by the hopper's feeding machine. The slope of the feeding pipeline should be greater than the natural angle of repose of the material to ensure smooth flow into the dryer. The dryer drum is a rotating cylinder slightly inclined from the horizontal line. Materials are added from the higher end, while the heat carrier enters from the lower end, contacting the materials in a countercurrent manner. There are also instances where the heat carrier and materials enter the drum simultaneously. As the drum dryer cylinder rotates, the materials are moved to the lower end by gravity.1The infrared drum dryer requires less space than other drying machines.50%Roughly, construction investment decreases.50%Approximately, energy consumption reduced60%The infrared drum dryer can easily adjust the desired final moisture content according to customer requirements. The infrared drum dryer has a low exhaust temperature and the dust removal equipment has a long service life. The large and small gears have stable transmission performance and high production efficiency. The drum of the infrared drum dryer has self-insulation, achieving a high thermal efficiency.70%Above, improve thermal efficiency35%Infrared drum dryer ensures the final moisture content of the material.0.5%Below is the dry-mixed mortar and slag powder production linesSelect products. Wet material moves forward within the drum, receiving direct or indirect heat supply from the heat carrier, which dries the material. Then, it is discharged at the outlet via a belt conveyor or screw conveyor. The infrared drum dryer is equipped with scraper blades on the inner wall of the drum, which lift and sprinkle the material to increase the contact surface with the airflow, enhancing the drying rate and promoting material movement. The heat carrier is typically divided into hot air, flue gas, etc. After passing through the dryer, it generally requires a cyclone dust collector to capture the material carried by the gas. To further reduce the dust content in the exhaust gas, it should pass through a bag dust collector or a wet dust collector before being emitted. Xuchang Infrared Institute will continue to focus on the research and development of infrared radiation heating technology to improve safety and efficiency.qEfficiency, reliability, and system lifespan, providing for you,zPure infrared heating technology solutions.