Infrared Mid-Frequency Inductive Heating Equipment                         

  Xuchang Infrared Technology Research Institute Co., Ltd. is located on Yongxing East Road, New & High-Tech Development Zone of Xuchang, Henan (Zhongyuan Electrical Valley), the predecessor of Xuchang Infrared Technology Research Institute, and is one of the influential infrared heating research institutions in China. Infrared medium-frequency induction heating equipment utilizes the principle of electromagnetic induction to generate eddy currents within the workpiece placed in the infrared induction coil, thereby heating the workpiece to the desired temperature. The equipment employs series or parallel resonance, resulting in a high power factor. Compared to traditional heating methods, it offers advantages such as high efficiency and low pollution. This equipment is widely used in industries such as forging and metal heat treatment. The working principle of the infrared medium-frequency induction heating equipment involves placing a metal cylinder inside an induction coil with alternating medium-frequency current. The metal cylinder does not come into direct contact with the infrared induction coil, and the temperature of the energized coil itself is already low. However, the cylinder surface is heated to redness, even to the point of melting. Moreover, the rate of this redness and melting can be controlled by adjusting the frequency and the intensity of the current. Fast heating speed, high production efficiency, minimal oxidation and decarburization, material and die cost savings Due to the principle of infrared medium-frequency induction heating, which is electromagnetic induction, the heat is generated internally within the workpiece. With a medium-frequency furnace, ordinary workers can start the forging task within ten minutes of starting work, eliminating the need for specialized workers to preheat and seal the furnace. Worry not about waste from preheated blanks in coal furnaces due to power outages or equipment failures. Since this heating method heats up quickly, oxidationjLess, compared to forging and coke oven, at least saves steel raw material per ton.20-50Kilograms, with a material utilization rate of95%Due to the even heating of this method, there is minimal temperature difference between the core and the surface.jSmall in size, which greatly increases the lifespan of the forging dies and reduces the surface roughness of the forged parts.50umThe medium-frequency furnace heating unit boasts advantages such as small size, light weight, high efficiency, superior thermal processing quality, and environmental benefits, rapidly replacing coal-fired, gas-fired, oil-fired furnaces, and standard resistance furnaces. It is the new generation of metal heating equipment. Infrared mid-frequency furnaces are the main equipment in foundry, forging, and heat treatment workshops. The stability, reliability, and safety of its operationsqSex is the guarantee for the normal and stable operation of the casting, forging, and heat treatment production line in the process of continuous flow. The infrared medium-frequency furnace has a promising future in the field of heat processing, such as mainly producing pre-forging heating furnaces, through-heat furnaces, and inductive heating for processes such as through-heat, rolling, forging, bending, heat treatment (quenching), and welding. Xuchang Infrared Institute will continue to maintain research and development of infrared radiation heating technology to enhance anqEfficiency, reliability, and system longevity, providing for you,zPure infrared heating technology solutions.