High-temperature radiation-resistantSurface Material

   Xuchang Infrared Technology Research Institute Co., Ltd. is located on Yongxing East Road, Xuchang High-Tech Industrial Development Zone (Zhongyuan Electric Valley) in Henan, Xuchang. Its predecessor was the Xuchang Infrared Technology Research Institute, and it is one of the influential infrared heating research institutions in China today. Our institute has been1979Year10Since its establishment a month ago, adhering to“Highlight strengths, rigorously focus on quality, strengthen services, strive for excellence”With a strong technical force, a highly-qualified staff, and a spirit of innovation, Xuchang Infrared Institute has developed and produced a series of infrared products at the forefront of the industry. Major products include: infrared radiation coatings, powder curing furnaces, far-infrared energy-saving coatings, infrared radiation (absorption) coatings, infrared heating elements, infrared radiation heating modules (plates), infrared radiation heating ovens (boxes), and rapid infrared radiation heaters, etc.gEnd infrared heating experimental equipment, series of infrared heating controllers, etc.Xuchang High-Temperature RadiationSurface MaterialExtensive experience in high-temperature far-infrared radiation energy-saving tests for furnace linings, furnace chambers, boilers, and electric furnaces, which can extend the service life of the linings.50Approximately %,1Coal-fired furnace, enhance heat efficiency0.5-5%；2Fuel, gas stoves, enhance heat efficiency1-13%；3High-temperature kiln equipment, enhancing thermal efficiency3-18%；4High-temperature electric furnace, enhancing thermal efficiency2-15%；

Construction Matters

1.Before use, thoroughly mix the paint inside the paint can to ensure even distribution. The activation period for stirring the paint is5Over a minute, restore to original colloidal state; recommend using mechanical stirring.qPower stir.

2.Place the paint in the container and mix thoroughly before applying. Apply with a brush. The coating thickness is approximately:0.3-0.5mmAt a rate of coating per kilogram2Square meters are suitable (for smooth surfaces).

3.Application Methods: Spray, brush, scraper, or roll coating.

Construction Environment Requirements:

1.Temperature:10~60℃Humidity:<80%；

2.No dust, no oil, no organic vapor, no water.

3.Temperature below15℃Or humidity>60%When heating and baking is required.

4.The construction and drying process requires ventilation.

Curing and hardening of the coating, curing environment for the coating solidification10℃Above, the curing temperature of the paint is20-50℃Between, in a well-ventilated and dry environment, the air humidity is less than60%Relative Humidity, Coating Naturally Cured2~3Above 24 hours, curing at room temperature, then the heating can be conducted according to the normal heating curve of the furnace. If the air humidity is greater than70%Or, if the temperature is below10℃Ensure a heating device is in place to increase the temperature of the working environment during painting to prevent the paint from failing to cure properly in high humidity or low temperatures.

Application Fields

1.Long-term working temperature:800－1400℃；

2.Applicable Furnaces: Ceramic kilns, cement kilns, steel rolling heating furnaces, sintering furnaces, fluidized bed furnaces, boilers, reverberatory furnaces, electric furnaces, etc.

3.Applicable Substrates: Neutral or acidic refractory bricks, castables, ceramic fibers, high-temperature cement, etc.

Note: The lifespan of the paint coating is three years. It is recommended to repaint or brush over the existing coating every three years to maintain optimal working condition.XWGTModel High Temperature Infrared Radiation Coating88Named as a recommended energy-saving project in Henan Province annually, and awarded the Third Prize for Technological Progress in Xuchang City.2002In the year, we developed and manufactured nanometer low-temperature infrared radiation coatings.