Medium and low temperature infrared radiation coating finished product

 Red Please provide the Chinese content you would like translated into American English. Radiation Ammunition Coating Material Base Please provide the Chinese content you would like translated into American English. Please provide the Chinese content you would like to have translated into American English. Numbers And Select Type            

   Adhesive   Temperature-resistant Emissivityε Applicable objects  Solvent Application Method Packaging Color Type

HS-2-1Low Temperature Modified Organic Silicon Resin  300℃  ≥0.86   Metals, ceramics, plastics, etc. Dimethyl   Spraying, brushing, etc.   3/5/12/25kg  Black, forest green, rust red

HS-2-1Medium temperature Modified Organic Silicon Resin  600℃  ≥0.88   Metals, Ceramics  Dimethyl   Spraying, brushing, etc. 3/5/12/25kg   Black, Charcoal Green, Rust Red

XWZT

Medium to high temperature   Modified Organic Silicon Resin  800℃  ≥0.90 Metals, Ceramics Dimethyl Spraying, brushing, etc. 3/5/12/25kg  Black, Iron Red

Note:1All the infrared radiation coating fillers mentioned above are made of zirconium ceramic powder.

      2Coatings, in total >50kgAt this time, other colors can be customized.

 300℃～1000℃Series Infrared Radiation Paint Application Instructions

I. Main Ingredients

Modified silicone resin, zirconia ceramic powder, thickeners, etc.

II. Features and Applications

This coating is a functional coating.,可直接 applied to the surface of the heating element to enhance its infrared radiation capability. It can also be coated onto the surface of the heated object to improve its absorption of infrared radiation energy. Construction reference:

1Coatings prior to applicationbMix thoroughly. Filter out any foreign impurities before use.

2Coated substratebThe surface must be cleaned of oil stains, followed by sandblasting treatment (can also be used)60-80#Sandpaper finishing before coating.

3The construction should preferably be done by spraying, and manual brushing is also acceptable. The viscosity is generally...15～20sLeft and right, if the paint is too thick, use...X－13Organosilicon paint thinner (dimethyl) dilution, coating thickness70～100 μm。

4After spraying, allow to dry at room temperature.30After a few minutes, then gradually increase to room temperature and into the oven300℃Baking30Cures in minutes.

V. Storage and Transportation

1The product is stored in a dry, well-ventilated warehouse with a storage temperature of35℃Below.

2Keep away from direct sunlight, sources of ignition, and heat sources; shelf life from the date of manufacture.180Days, beyond the storage period, can be inspected; if it meets the requirements, it can still be used.

3During transportation, this product should be protected from rain and direct sunlight, and should comply with the relevant regulations of the transportation department.