Taizhou Plastic Pallets Manufacturer, In Stock, Quality Plastic Pallets, Xinyi

Product Parameters Comparison Chart

                                           Manufacturer's Aesthetic Overview - Case IntroductionAutomated assembly line operations

                     Tote care and maintenance注意事项

Section outlines the necessary precautions to ensure long-term and safe use of plastic pallets during actual operation, strictly prohibits unauthorized operation, and hopes that the user will properly operate and use according to the following requirements:

a. Plastic pallets should be avoided from direct sunlight to prevent aging and extend their service life.

b. Absolutely no throwing goods from heights onto plastic pallets. Reasonably determine the stacking method of goods on the pallet. Place goods evenly, avoid centralizing or off-center stacking.

c. Absolutely no dropping plastic pallets from heights or throwing them from low to high. Prevent breakage or cracking due to severe impacts.

d. During the use of forklifts and hydraulic trucks with pallets, the distance between the fork tines should be widened as much as possible to beyond the outer edge of the pallet's fork entry. The insertion depth should be greater than 2/3 of the entire pallet depth. In actual operation, maintain a steady speed for both advancing and retracting, as well as lifting and lowering, to avoid abrupt stops or turns that could damage the pallet or cause goods to topple. The fork tines should not strike the side of the pallet to prevent cracking or breaking.

e. When stacking on pallets, ensure the goods are level to distribute the load evenly across the pallet's base, preventing excessive deformation and potential cracking. When placing the pallet on the shelf, keep the pallet stable on the shelf beam, with the length of the pallet exceeding the outer diameter of the shelf beam by at least 50mm.

2. Storage environment and usage conditions for the pallet

Users must comply with relevant laws and regulations related to safe production to ensure product quality. Unauthorized operations are strictly prohibited during actual operation. To ensure the long-term and safe use of plastic pallets, it is requested that plastic pallets be stored and used correctly according to the following requirements:

Plastic pallets should be kept out of direct sunlight to prevent aging and extend their service life.

2. Absolutely no throwing goods from heights onto plastic pallets. Reasonably determine the stacking method of goods on the pallet. Place goods evenly, avoid centralized stacking, and do not stack off-center.

3. Absolutely prohibit dropping plastic pallets from heights or throwing them from low to high, to prevent damage such as cracking or breaking due to impact.

4. Use steel pipe plastic pallets in a dry environment.