Heze manufactured plastic pallets, reasonable prices, plastic pallet specifications and sizes, Xinyi

Product Parameter Comparison Chart

                                           Manufacturer Overview - Case Introduction

Automated assembly line operations

                     Tote usage and maintenance precautions

The section outlines the necessary precautions to ensure the long-term and safe use of plastic pallets during actual operation. Strictly prohibit any unauthorized operations. We hope the user will properly operate and use the product according to the following requirements:

Plastic pallets should be kept out of direct sunlight to prevent aging and extend their lifespan.

b. Absolutely prohibit throwing goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly, avoid concentrating them in one area, and do not stack off-center.

c. Absolutely prohibit dropping plastic pallets from heights or throwing them from low to high, to prevent breakage or cracking due to violent impacts.

d. During the use of forklifts and hydraulic trucks with pallets, the distance between the forks should be widened as much as possible to the outer edge of the pallet's fork entry. The fork insertion depth should be more than 2/3 of the entire pallet depth. In actual operation, maintain a steady speed for both forward and backward movement, as well as lifting and lowering, to avoid abrupt stops or turns that could damage the pallet or cause goods to topple. Do not allow the forks to strike the sides of the pallet to prevent breakage or cracking.

e. When stacking on a pallet, ensure the goods are placed flat to distribute the load evenly across the bottom of the pallet, preventing excessive deformation and potential cracking. When placing the pallet on the shelf, maintain a level placement on the shelf beam, with the pallet length exceeding the outer diameter of the beam by at least 50mm.

2. Pallet storage environment and usage conditions

Users must comply with relevant laws and regulations regarding safe production and ensure product quality. Strictly prohibited is any operation that violates regulations. To ensure long-term and safe use of plastic pallets, it is requested that plastic pallets be stored and used correctly according to the following requirements:

1. Plastic pallets should be kept out of direct sunlight to prevent aging and extend their lifespan.

2. Absolutely no throwing goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly, avoid clustering, and do not stack off-center.

3. Absolutely no dropping plastic pallets from heights or throwing them from low to high, to prevent breakage or cracking due to violent impacts.

4. Steel pipe plastic trays should be used in a dry environment.