The Windbreak Dust Suppression webpage features two structures: windbreak dust suppression boards and dust interception nets. The windbreak dust suppression page is set on the mainstream wind surface, primarily to reduce wind strength. The dust interception page is set on other secondary wind surfaces, mainly to prevent the mainstream wind from carrying away dust particles. When the wind direction changes and the windbreak dust suppression page faces the mainstream wind direction, it reduces wind strength; while the other pages prevent the escape of dust particles.
Aluminized Zinc Anti-Wind and Dust Suppression Mesh Series: Molding width of 810mm, peak height of 80mm  The wind and dust suppression wall utilizes aerodynamic principles, processed into a certain geometric shape, aperture rate, and different aperture combinations based on wind tunnel experiments conducted at the actual implementation site. This design allows the flowing air (strong wind) to pass through the wall, creating upper and lower interference currents inside the wall, achieving the effect of strong wind on the outside, weak wind on the inside, small wind on the outside, and no wind on the inside, thereby preventing the飞扬 of dust.

The opening rate of the windbreak dust suppression plate webpage is 20% to 50%, providing excellent flow guidance, directing incoming wind, and conducting it for straightening, transforming turbulent flow into a steady streamline movement in a specific direction, reducing its impact on the surface of the pile and ground, and minimizing dust generation.