Water Level Indicator Model XW-1, Xuzhou Weisi Water Level Monitoring Instrument
Xuzhou Weisi Gate Opener XH-9 Type Gate Opener Load Gauge -- Load Measurement and Control Instrument
Tangent Flow Meters, LSC Series Box Type Tangent Flow Meters, Flow Meters
Product Details
Hydrological Instruments, Other Meteorological Instruments, Safety Equipment,...
产品Price Negotiable
最小起订Quantity： 供货总Quantity：
Integrated Control Gate, Wuxiu Wesi Integrated Control Gate, Integrated Control Gate Manufacturer
¥5000.00
Gate Monitoring System, Xuzhou Weisi Gate Monitoring System, Gate Monitoring System Manufacturer
¥5000.00
Integrated Control Gate, Xuzhou Weisi Integrated Control Gate, Integrated Control Gate Manufacturer
¥5000.00
Technical Specifications
1. Gate Open Range: Same as sensor (10m, 20m, 40m, 80m, etc.).
2. Resolution: Same as the sensor (1cm, 1mm, etc.).
3. Measurement Accuracy: Same as the sensor, ±0.1% of range ±1cm (or 1mm).
4. Display Range: 99.99m or 999.9cm
5. Display Method: 2x4 LED display. The top row of 4 digits shows the gate opening value (displayed in red), with a character height of 0.8". The bottom row of 4 digits shows the limit position (displayed in green), with a character height of 0.8".
6. Connection method between sensor and display: multi-core cable (14~20 cores).
7. Input Code System (Sensor Output Code System): Cyclic Code (Gray Code) or other code systems (customized upon request).
8. Cable distance between sensor and display: Up to 2km.
9. Data Transmission Method (Optional):
1) RS-485 (XZ-9A model), networked via a pair of twisted wires.
Data Transmission Distance: 1.2 km.
RS-485 Communication Protocol: 1) MOD-WS1 (MODBUS); 2) SDI-12.
2) 4~20mA current loop (XZ-9B model), transmitted via a pair of wires.
10. Current Loop: Resolution: Same as sensor; Non-linearity: ±0.012%; Error: ±0.15%
11. Manual preset function
1) Limit (gate lifting and lowering limit) preset: Any value at factory.
2) Upper Limit Preset: Openness value at factory.
3) Lower Limit Preset: Set to zero at factory.
4) Segmented Value Preset
5) Communication Station Number Preset: Typically set to 01 at factory.
12. Alarm and Control Functions
Alarm Control Signal: Relay Contacts. Contact Rating: 1A 24VDC, 0.5A 125VAC.
When the value is greater than or equal to the upper limit and less than or equal to the lower limit, the relay contacts will close and an audio-visual alarm will sound (the decimal point in the data area will flicker). The audio alarm duration is approximately 10 seconds. At the mid-limit, only the relay will activate.
During limit preset, if above the current gate level, an alarm is triggered when greater than or equal to the limit value; if below the current gate level during preset, an alarm is triggered when less than or equal to the limit value.
13. Display and sensor coupling: photoelectric isolation
14. Working Environment Temperature: 0℃ ~ +50℃, Relative Humidity: 85% (+25℃).
15. Power: 120VAC ~ 264VAC, 47~440Hz. Power Consumption: <5W. Fuse: 2A.
Phone Consultation