Product Description
An open mixing mill, also known as a kneader, is primarily used for the mixing of rubber and plastics. It is a machine equipped with a pair of rotors with specific shapes that rotate relative to each other, and it intermittently塑炼和混炼polymer materials in a sealed state at adjustable temperatures and pressures. It is mainly composed of the kneading chamber, rotors, rotor sealing devices, feeding and pressing units, discharging equipment, transmission system, and base.
Operating Principle
During the operation of the extruder, the two rotors rotate relative to each other, gripping the material between the rolls where it is subjected to compression and shearing by the rotors. The material is subjected to shearing and friction, which increases the temperature and decreases the viscosity of the rubber, enhancing its wetting properties on the surface of the additives. This allows for thorough contact between the rubber and the additive surface. The convex ridges on the rotors facilitate axial movement of the rubber, acting as a mixing tool. This ensures the additives are evenly mixed within the rubber. The continuous stirring and shearing action of the ridges achieves a certain degree of dispersion in the rubber.
Product Detailed Specifications
Mixing Capacity: 0.5L
2: Feeding Quantity: 50g - 300g (varies depending on formula materials)
Temperature: Room temperature to 300℃
4: Electrical Components: Machines are equipped with safety interlock features
5: Heating Method: Heating Tube Heating
Cooling Method: Water Cooling (Customer-provided water source interface)
7: Programmed System: Fully automatic program control directly displays temperature, time, speed, etc., with all parameters adjustable and controllable at will.
8: Touchscreen Size: 10 Inches
9: Main Motor: 2.2 kW
10: Upper Weight: 5kg Weight Block
11: Rotor Type: Shearing Rotor
12: Rotor Speed: 0-70 rpm, Variable Frequency Speed Control
13: Rotor Speed Ratio: 1:1.27
14: Rotor Material: Alloy steel, chrome plated surface, hardness ≥ 62HRC, with treatments such as shot peening, precision grinding, polishing, and chrome plating (high tensile strength, wear-resistant, heat-resistant)
15: Rotor Hardness: The rotor is vacuum heat treated and surface chrome plated, with hardness ≥ 62HRC.
16: Mixing cavity: Alloy steel, internal cavity surface with hard chrome plating, hardness ≥ 60HRC, finished with surface grinding, nitriding, polishing, etc. (Corrosion and wear-resistant)
17: Disassembly Method: Detachable rotor and cavity
18: Equipment Dimensions: 1000*500*1400mm
Weight: 450 kg
21: Equipment Power Supply: Three-phase, five-wire, AC380V
