Product Description:

This machine is suitable for various pressure tests, capable of setting coordinates, automatically moving for testing, and recording test values. It utilizes Windows-based Chinese written settings, allowing all data to be stored (test conditions, load-resistance-distance curves, life span curves, inspection reports, etc.).

This machine features high-precision motor transmission, enabling precise measurement of (load-travel) and accurate key and switch curve testing.

II. Main Specifications and Parameters:

1. Load Capacity Test: 5000gf

2. Resolution: 0.001gf

3. Z-axis travel measurement: 120mm

4. Z-axis travel display: 0.001mm

5. Speed Range: 0~300 mm/min

6. X-axis travel speed: 500 mm/min

7. Y-axis travel speed: 300 mm/min

8. Machine Drive Mechanism: Ball Screw

9. Machine Drive: Drive Motor

10. Machine Dimensions: W820*D600*H1000 mm

11. Desk dimensions: W1400*D600*H670 mm

12. Machine Weight: 120 kg

13. Power Source: 220V

III. Main Functions and Features:

3.1 Main Features:

★ Enter coordinates for the X, Y, and Z axes freely, and the machine automatically moves to the test position.

★ Input test routes and loads, with automatic computer control and testing.

★ Settable load capacity; upon reaching the load value, the machine can pause.

★ Settable route; machine can pause upon reaching the route value.

★ Directly test and plot the graphic of each travel point (0.01mm) with load.

★ Each measurement graphic can be tracked by a crosshair cursor to identify the corresponding load and travel value, with a resolution of 0.01mm.

★Test items can input upper and lower specification values, and the results can be automatically judged as OK or NG.

★ One formula can test eight different load specifications, with both high and low keys available:

★ Known travel can test the corresponding load or resistance, or known load can measure the corresponding travel or resistance.

★Printable and storable graphics (load-travel curves, life curves, inspection reports)

★Storage for Test Data and Hard Drive (Each piece of data can be stored, unlimited times);

★Test conditions are all set by the computer (including test load, stroke, speed, number of cycles, pause time, etc.).

★ Header content of inspection reports can be modified at any time (both Chinese and English are acceptable).

★ Inspection reports can be saved to Excel, Word, or PDF for editing, or directly outputted via the internet.

★ AutoCAD drawings can be automatically imported with product coordinates, significantly enhancing work efficiency!

★ While testing the load and stroke, the impedance resistance function can also be tested.

3.2 Features:

1. Instrument overload protection

2. Emergency shutdown device, upper and lower travel limit devices;

3. Software setting parameter value limit protection