I. Product Description:

The fully automatic insertion and extraction force tester is suitable for testing the insertion and extraction forces of various connectors and products. It offers various connector clamping fixtures and comes with an automatic centering device, ensuring accurate insertion and extraction force tests. The Windows Chinese window software interface allows for easy settings. All data, including test conditions, insertion and extraction stroke curves, life span curves, and inspection reports, can be stored.

Simultaneously, address issues with fixtures for various connector tests, ensuring male and female connectors automatically align during testing without misalignment.

II. Main Specifications and Parameters:

Model No.: 1220S

2. Net Weight: 20 kg

3. Load Reading Value: 0.01gf

4. Test units options: N, gf, kgf, lbf

5. Test Speed: 0-300 mm/min

6. Test Range: 0-150mm

7. X, Y-axis travel range: 0-75mm

8. Transmission Mechanism: Ball Screw

9. Fine Adjustment Range: 0.01mm

10. Drive Motor: High Precision Motor

11. Dimensions: W360*D260*H940mm

12. Machine Weight: 76 kg

III. Main Features and Characteristics:

All test conditions can be set by the computer and saved. Settings can be selected through dropdown menus or entered directly (including test category, measurement direction, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total measurement times, pause time, waiting position per cycle, and air pressure cycles).

Printable and storeable graphics (insertion-extraction displacement curves, load decay life curves, inspection reports);

Overload protection with both hardware and software protection features.

※ Enter test upper and lower limit values; the machine will stop automatically if out of specification.

Load units can be freely switched between N, lb, gf, and kgf.

After testing, the life curve chart of load decay can be exported.

Test data is stored on a hard drive (each piece of data can be stored, no limit on the number of times).

The header content of the inspection report can be modified at any time (both Chinese and English are acceptable).

Graphical chart reports available; text reports can be customized by customers with headers and logos.

The inspection report can be converted to .WORD, .EXCEL, and PDF for editing.

IV. Expansion of Main Test Items:

Test for the degradation curve analysis of connector insertion/extraction life.

2. Connector full row insertion/extraction test, single PIN retention test;

3. Test of connector products' insertion force and displacement, as well as withdrawal force and displacement.

4. Connector single-hole insertion/extraction test, connector normal force test;

5. General compression and tensile failure tests

6. Test for USB plug and pull life curve analysis

7.1220S test equipment features a 19.5-inch LCD monitor with an oversized screen, allowing for a direct view of the load-displacement curve changes.

8.1220S test equipment fixtures can perform a wide range of tests, including conventional connector row insertion and extraction tests, single PIN retention force tests, insertion force and displacement, and pull-out force and displacement tests for connector products, single hole insertion and extraction tests for connectors, normal force tests for connectors, as well as general compression and tensile failure tests, and other testing tasks.