Product Description:

This machine is suitable for testing the mechanical properties of various materials, glass, semi-finished, and finished products, including insertion, extraction, stretching, compression, bending, peeling, and tearing. It can be equipped with various stretching or compression fixtures and a patented automatic centering device, enabling the testing of tensile, compressive, bending, and folding properties of different materials.

This machine utilizes a high-precision motor and a Windows-based control system, offering simple and convenient operation, with a Windows Chinese interface software setup. All data, including test conditions, travel curve graphs, lifespan curve graphs, and inspection reports, can be stored.

Section II: Main Specifications and Parameters:

Model: WH-5020

2. Weight: 200kg (Choose from 5.10.20.50.100.200.500kg)

3. Load Reading: 0.01gf

4. Test Units Available: N, gf, kgf, lbf

5. Test Speed: 0-300 mm/min

6. Fixture XY Travel Adjustment: X: 70mm, Y: 70mm

7. Z-axis travel: 500mm

8. Transmission Mechanism: Ball Screw

9. Fine Adjustment Distance: 0.01mm

10. Drive Motor: High-Precision Motor

11. Dimensions (W*D*H): 700mm x 550mm x 1240mm

12. Machine Weight: 145 kg

13. Voltage: 220V

III. Main Features and Characteristics:

All test conditions can be set by the computer and saved. Settings can be selected via a dropdown menu or entered directly (including test category, measurement direction, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, waiting position per cycle, and air pressure cycles).

2. Printable and storable graphics (insertion/extraction displacement curve charts, load decay life curve charts, inspection reports)

3. Dual protection function of overload protection for load units and software protection

4. Enter test upper and lower limit values; the machine will automatically stop if out of specification.

5. Load units can be freely switched between N, lb, gf, and kgf.

6. Three-point, four-point retention pressure for glass, light guide plates.

7. Destructive tests on tensile and compressive materials.

8. After testing, export the load decay life curve graph.

9. Test data is stored on the hard drive (each piece of data can be saved, with no limit on the number of times).

10. The header content of inspection reports can be modified at any time (both Chinese and English).

11. Graph chart reports available, with customizable headers and logos according to customer specifications.

12. Inspection reports can be converted to .WORD, .EXCEL, and .PDF for editing.

4. Expand Key Testing Items:

Test for the wear-out curve analysis of connector mating cycles.

2. Test of connector products for insertion force and displacement, as well as withdrawal force and displacement.

3. Test for USB plug-pull load life curve analysis.

4. The WH-5020 testing fixture can perform numerous routine connector row insertion and extraction tests, single PIN retention force tests, insertion force and displacement tests for connector products, as well as pull-out force and displacement tests, single-hole insertion and extraction tests for connectors, normal force tests for connectors, compression and tensile failure tests, and other testing tasks.

5. WH-5020 Testing Equipment for Tensile, Pressure, Bending, Tearing, and Peel Tests.

6. WH-5020 Testing Equipment: Tensile, Bend, Compression, Three/ Four Point Static Pressure Tests.

7. The WH-5020 testing equipment paired with the Dynamic Impedance Test System allows for the simultaneous testing of dynamic impedance while measuring insertion force, and plotting a "Load-Impedance-Stroke Curve."