I. Product Description:

The fully automatic insertion and extraction force tester is suitable for testing the insertion and extraction forces of various connectors and products. It provides various connector fixtures and is paired with an automatic centering device, ensuring accurate insertion and extraction force tests. The Windows Chinese window software interface allows for easy setup. All data, including test conditions, insertion and extraction stroke curves, lifespan curves, and inspection reports, can be stored.

Simultaneously, address various fixture issues for connector testing, ensuring that male and female connectors can automatically align during testing without any one-sided engagement problems.

Section II: Main Specifications and Parameters:

Model No.: 1220S

2. Net Weight: 50 kg

3. Load Reading: 0.01gf

4. Test units available: N, gf, kgf, Ibf

5. Test Speed: 0-300 mm/min

6. Test Range: 0-150mm

7. X, Y-axis travel range: 0-75mm

8. Transmission Mechanism: Ball Screw

9. Fine Adjustment Distance: 0.01mm

10. Drive Motor: High Precision Motor

11. Dimensions: W360*D260*H940mm

12. Machine Weight: 76 kg

III. Main Features and Characteristics:

All test conditions can be set and saved by the computer. Settings can be selected via a dropdown menu or entered directly (including test category, measurement direction, load range, travel range, origin position, origin detection, speed measurement, total number of measurements, pause time, waiting position per cycle, and air compression count).

Printable and storeable graphics (insertion-extraction displacement curves, load decay life curves, inspection reports);

Dual protection function of overload protection for load units and software protection;

Enter test upper and lower limit values; the machine will automatically stop if out of specification.

Load units can be freely switched between N, lb, gf, and kgf.

Exportable load decay life curve graph after testing.

Test data is stored on a hard drive (each piece of data can be saved, with no limit on the number of times).

The header content of the inspection report can be modified at any time (both in Chinese and English).

Graph chart reports, text reports can be customized by the customer with headings and logos.

The inspection report can be converted to .WORD, .EXCEL, and .PDF for editing.

Section 4: Key Testing Projects for Expansion

Test for the wear-out curve analysis of connector insertion/extraction life.

2. Connector row insertion/extraction test, single PIN retention test;

3. Test of insertion force and displacement, as well as pull-out force and displacement for connector products.

4. Connector single-hole plug-pull test, connector normal force test;

5. General compression and tensile fracture tests

6. Test for USB plug and pull life curve analysis

7. The 7.1220S testing equipment features a large 17-inch LCD screen, allowing for a clear and direct observation of the load-displacement curve changes.

8.1220S Test Equipment Fixtures can perform numerous routine tests, including plug-and-pull tests for connector arrays, single PIN retention tests, insertion force and displacement, and pull-out force and displacement tests for connector products, single-hole plug-and-pull tests, normal force tests for connectors, as well as general compression and tensile failure tests.