1. Position the compressor pump as close to a well-ventilated, dust-free, and low-humidity area as possible; use rubber shock-absorbing feet or spring shock mounts for the base.

2. Connect the intake port with a 1/4-18 NPT fitting or other specifications, and attach intake filters and mufflers; connect the exhaust pipe or muffler.

3. Ensure the power supply has adequate capacity, and confirm the voltage meets product requirements.

4. Connect the power and capacitor wires according to wiring specifications.

5. After verifying that all components of the compressor pump are normal, plug the power cord into a power outlet that meets the requirements (the power outlet must have a good ground). The machine will begin operation.