Product Specifications:
| I. Main Configuration | ||||
| 1 | Controller: | Mitsubishi M70B Controller | ||
| 2 | Three-axis travel range: | 800×500×500(mm) | ||
| 3 | Worktop Surface: | 500×1000 (mm) | ||
| 4 | Spindle Specifications: | BT40 / 10,000 rpm Taiwan Lohay Spindle (Belt Drive) | ||
| 5 | Quick Shift Speed: | X﹨Y : 30 m/min Z: 16 m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Pneumatic Pull Knife Assembly | |
| 2 | Work Completion Warning Light | 7 | Network Transmission Function | |
| 3 | Electronic Handwheel | 8 | Toolbox and manual | |
| 4 | Cooling System | |||
| 5 | Work Light Lighting | |||
Technical Specifications:
| Model | TXC-2015 | |
| X-axis travel | 2000㎜ | |
| Y-axis stroke | 1650㎜ | |
| Z-axis travel | 800㎜ | |
| Distance from main shaft center to column guide rail | 560 ㎜ | |
| Spindle nose to table surface | 110-610㎜ | |
| Workstation | ||
| Workbench area | 500×1000㎜ | |
| Load Capacity | 450 kg | |
| T-slot width/quantity | 5-18×90 ㎜ | |
| Main shaft | ||
| Main shaft taper | BT40 | |
| Spindle Speed | Belt-driven 10,000 rpm | |
| Motor | ||
| Spindle Power | 7.5 kw | |
| Three-axis motor power | X/ Y / Z ：2 kw | |
| Feed Speed | ||
| Cutting Speed | 1-12000 mm/min | |
| Three-axis rapid traverse speed | X﹨Y : 30 m/min Z: 16 m/min | |
| Positioning Accuracy (mm) | ±0.004/300 | |
| Repeatability Positioning Accuracy (mm) | ±0.003 | |
| Other Specifications | ||
| Mechanical weight | 5000 kg | |
| Mechanical dimensions | 2800*3000*2850 | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin |
| 1 | Mitsubishi M70B Controller | Mitsubishi of Japan |
| 2 | Monitor Unit | Mitsubishi of Japan |
| 3 | Three-axis motor | Mitsubishi of Japan |
| 4 | Spindle Motor | Mitsubishi of Japan |
| 5 | BT40-10,000rpm (Belt Drive) Spindle | Taiwan Loyi |
| 6 | C3 grade ball screw | Taiwan Sunyuan/Sintai |
| 7 | Three-axis telescopic inner guard | Shanghai Zhenfei |
| 8 | Centralized automatic lubrication system | Valley/Brighton |
| 9 | Tapered Ball Bearing Import | Japan NSK |
| 10 | Axial Coupling | Germany/Japan |
| 11 | Wire material | Shanghai Zhehong |
| 12 | Operation Panel Unit | Shanghai Zhehong |
| 13 | Handwheel | Shanghai Zehong |
| 14 | LED Work Lighting Lamp | Shanghai Zehong |
| 15 | Relay board | Shanghai Zhehong |
| 16 | Tri-color alarm light | Shanghai Zhehong |
| 17 | Circuit Breaker | France (Schneider) |
| 18 | Contactor | France (Schneider) |
| 19 | Cutting Cooling Motor | Changzhou Nok |
| 20 | Electrical cabinet heat exchanger | Rike |
| 21 | Ethernet Cable | |
| 22 | Punching cylinder | |
| 23 | Blowing System | |
| 24 | Tool Box | |
| 25 | 1"Size 1 Flat Head Screwdriver" | |
| 26 | Hexagon wrench | |
| 27 | Locking knife holder one | |
| 28 | A complete set of blades (including a set of hooks, Latin, and wrench) | |
| 29 | A set of pressure plates | |
| 30 | 6-inch flat-nose pliers, 1 pc | |
| 31 | Large Cross Screwdriver | |
| 32 | Programming Manual | |
| 33 | Operation Manual | |
| 34 | Leveling Adjustment Pads | |
| 35 | Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller is responsible for free installation, adjustment of the equipment, and on-site free training for the operators and maintenance personnel at the Buyer's location.
4.2 Technical Support: The Seller shall provide effective technical support, and may adjust machine tool parameters according to the processing characteristics of the products required by the Buyer.
4.3 Warranty Period: The machine tool is provided with a 12-month free warranty after acceptance, during which free parts and services are offered, ensuring timely and effective service.
4.4 Service Time Commitment: The seller commits to having the after-sales service personnel arrive on-site to handle the machine tool repair within 24 hours of receiving the repair report.
4.5 Post-warranty technical support: Within 2 years after the warranty expires, the seller provides free software technical consulting services. In case of failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller shall continue to supply the buyer with discounted wear-and-tear repair parts, with the repair parts being provided to the buyer at the seller's procurement cost price.
Machine Tool Acceptance:
5.1 Acceptance Criteria: Conducted according to technical requirements and parameters.
5.2 Receiving Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a pre-inspection. This includes checking geometric and positioning accuracy, as well as machining standard samples to verify processing precision and range. Only upon passing the inspection and both parties signing off, can the shipment proceed.
5.2.2 Inspection results are to be finalized upon final acceptance.
Factory Documents:
| Serial Number | File Name | Quantity |
| 1 | Machine Accessories List | 1 |
| 2 | Inspection Certificate of Origin | 1 |
After-Sales Service
1. One-year warranty for any product quality issues from the date of goods delivery.
2. If the unit is used, any non-natural damage caused by improper use or modification is not covered under the above warranty, and the user must bear the repair costs.
