Product Specifications:
| Main Configuration | ||||
| 1 | Controller: | Mitsubishi M70B Controller | ||
| 2 | Three-axis travel: | 800×500×500(mm) | ||
| 3 | Worktop Surface: | 450×900 (mm) | ||
| 4 | Spindle Specifications: | BT40 / 12,000 rpm Taiwan LoYi Spindle (Direct Drive) | ||
| 5 | Fast Speed: | X﹨Y﹨ Z : 48 m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Pneumatic Pull Knife Assembly | |
| 2 | Work Completion Warning Light | 7 | Network Transmission Function | |
| 3 | Electronic Handwheel | 8 | Toolbox and instruction manual | |
| 4 | Cooling System | 9 | BT40-24T Tool Magazine | |
| 5 | Work Light Lighting | |||
Technical Specifications:
| Model | TXC-V8 | |
| X-axis travel | 800㎜ | |
| Y-axis travel | 500㎜ | |
| Z-axis travel | 500㎜ | |
| Distance from spindle center to column guide rail | 599 ㎜ | |
| Spindle nose to table face | 170-670㎜ | |
| Workstation | ||
| Workbench area | 450×900 ㎜ | |
| Load Capacity | 500 kg | |
| T-slot width/quantity | 3-18×130 ㎜ | |
| Spindle | ||
| Main shaft taper | BT40-￠150 | |
| Spindle Speed | Direct-drive 12,000 rpm | |
| Motor | ||
| Spindle Power | 7.5 kw | |
| Three-axis motor power | X/ Y ：2 kw Z ：3 kw | |
| Feed Speed | ||
| Cutting Speed | 1-12000 mm/min | |
| Three-axis rapid traverse speed | X﹨Y﹨ Z : 48 m/min | |
| Positioning Accuracy (mm) | ±0.004/300 | |
| Repeatability Accuracy (mm) | ±0.003 | |
| Other Specifications | ||
| Mechanical Weight | 5000 kg | |
| Mechanical dimensions | 2750*3300*2900 | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin |
| 1 | Mitsubishi M70B Controller | Mitsubishi of Japan |
| 2 | Display Module | Mitsubishi of Japan |
| 3 | Three-axis motor | Mitsubishi of Japan |
| 4 | Spindle Motor | Mitsubishi of Japan |
| 5 | BT40-φ150-12000rpm Spindle | Taiwan Lohye |
| 6 | C3 Grade Ball Screw | Taiwan Sun Yat-sen/Silver Tai |
| 7 | Three-axis telescopic inner guard | Shanghai Zhenfei |
| 8 | Centralized automatic lubrication system | Valley / Proton |
| 9 | Tapered ball bearing import | Japan NSK |
| 10 | Axial Coupling | Germany/Japan |
| 11 | Wires | Shanghai Zehong |
| 12 | Operation Panel Unit | Shanghai Zhehong |
| 13 | Handwheel | Shanghai Zehong |
| 14 | LED task lighting fixture | Shanghai Zhehong |
| 15 | Relay board | Shanghai Zhehong |
| 16 | Three-color alarm light | Shanghai Zhehong |
| 17 | Circuit Breaker | France (Schneider) |
| 18 | Contactor | France (Schneider) |
| 19 | Cutting Coolant Motor | Changzhou Nok |
| 20 | Electrical Box Heat Exchanger | Rike |
| 21 | Oil Cooler | Rikeco |
| 22 | Ethernet Cable | |
| 23 | Drill cylinder | |
| 24 | Blowing System | |
| 25 | Tool box | |
| 26 | 1-inch screwdriver | |
| 27 | Hexagon socket wrench | |
| 28 | Locking knife holder one | |
| 29 | A complete set of blades (including a set of sprockets, Latin, and wrench) | |
| 30 | Nut set | |
| 31 | 6-inch flat-nose pliers set | |
| 32 | Large Cross Screwdriver | |
| 33 | Programming Manual | |
| 34 | Operation Manual | |
| 35 | Leveling Adjustment Pads | |
| 36 | Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller is responsible for free installation and adjustment of the equipment at the Buyer's site, as well as providing free on-site training for the operation and maintenance personnel.
4.2 Technical Support: The Seller provides effective technical support, which includes adjusting machine tool parameters according to the product characteristics required by the Buyer.
4.3 Warranty Period: The machine tool comes with a 12-month free warranty after acceptance, during which free parts and services are provided, ensuring timely and effective service.
4.4 Service Time Commitment: The seller promises that within 24 hours of receiving a machine tool failure repair report, the after-sales service personnel will arrive on-site to handle the issue.
4.5 Post-warranty technical support: Within 2 years after the warranty expires, the seller provides free software technical consulting services. In case of any failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller shall continue to provide the buyer with cost-effective spare parts for repairs, with the repair parts being supplied to the buyer at the seller's procurement cost price.
Machine Tool Acceptance:
5.1 Acceptance Standards: Conducted according to technical requirements and parameters.
5.2. Acceptance Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a pre-inspection. Check the geometric and positioning accuracy, process standard samples, and verify the processing accuracy and range. Both parties must sign and confirm the inspection as passed before shipment.
5.2.2 Inspection results are to be deemed final upon final acceptance.
Manufacturer's documents:
| Serial Number | Document Name | Quantity |
| 1 | Outfitting Accessories List | 1 |
| 2 | Manufacturing Quality Inspection Sheet | 1 |
After-Sales Service
1. We offer a one-year warranty on the product quality from the date of goods delivery.
2. If the unit is used, any damage caused by misuse or modification that is not natural is not covered under the above warranty. The user must pay for the repair costs.
