Product Specifications:
| I. Main Configuration | ||||
| 1 | Controller: | Mitsubishi M70B Controller | ||
| 2 | Three-axis travel: | 800×500×500(mm) | ||
| 3 | Worktop Surface: | 500×1000 (mm) | ||
| 4 | Spindle Specifications: | BT40 / 10,000 rpm Taiwan LoiYi Spindle (Belt Type) | ||
| 5 | Quick Shift Speed: | X﹨Y : 30 m/min Z: 16 m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Pneumatic Pull Knife Device | |
| 2 | Work Completion Warning Light | 7 | Network Transmission Function | |
| 3 | Electronic Handwheel | 8 | Toolbox and manual | |
| 4 | Cooling System | |||
| 5 | Work Light Lighting | |||
Technical Specifications:
| Model | TXC-I660 | |
| X-axis travel | 800㎜ | |
| Y-axis travel | 500㎜ | |
| Z-axis travel | 500㎜ | |
| Distance from spindle center to column guide rail | 560 ㎜ | |
| Spindle nose to table face | 110-610㎜ | |
| Workstation | ||
| Workbench area | 500×1000㎜ | |
| Load Capacity | 450 kg | |
| T-slot width/quantity | 5-18×90 ㎜ | |
| Spindle | ||
| Spindle Taper | BT40 | |
| Spindle Speed | Belt Drive 10,000 rpm | |
| Motor | ||
| Spindle Power | 7.5 kw | |
| Three-axis motor power | X/ Y / Z ：2 kw | |
| Feed Rate | ||
| Cutting Speed | 1-12000 mm/min | |
| Three-axis quick movement speed | X﹨Y : 30 m/min Z: 16 m/min | |
| Positioning Accuracy (mm) | ±0.004/300 | |
| Repetition Positioning Accuracy (mm) | ±0.003 | |
| Other Specifications | ||
| Mechanical weight | 5000 kg | |
| Mechanical dimensions | 2800*3000*2850 | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin |
| 1 | Mitsubishi M70B Controller | Mitsubishi of Japan |
| 2 | Monitor Unit | Mitsubishi of Japan |
| 3 | Three-axis motor | Mitsubishi of Japan |
| 4 | Spindle Motor | Mitsubishi of Japan |
| 5 | BT40-10,000rpm (Belt Drive) Spindle | Taiwan Lo Yee |
| 6 | C3 grade ball screw | Taiwan Sun Yat-sen/Silver Tai |
| 7 | Three-axis telescopic inner guard | Shanghai Zhenfei |
| 8 | Centralized automatic lubrication system | River Valley / Proton |
| 9 | Angled Ball Bearing, Imported | Japan NSK |
| 10 | Axial Coupling | Germany/Japan |
| 11 | Wires | Shanghai Zhehong |
| 12 | Operation Panel Unit | Shanghai Zhehong |
| 13 | Handwheel | Shanghai Zehong |
| 14 | LED task lighting fixture | Shanghai Zhehong |
| 15 | Relay board | Shanghai Zhehong |
| 16 | Tri-color alarm light | Shanghai Zehong |
| 17 | Circuit breaker | France (Schneider) |
| 18 | Contactor | France (Schneider) |
| 19 | Cutting Cooling Motor | Changzhou Nok |
| 20 | Electrical cabinet heat exchanger | Rike |
| 21 | Ethernet Cable | |
| 22 | Drill cylinder | |
| 23 | Blowing System | |
| 24 | Toolbox | |
| 25 | 1-inch screwdriver | |
| 26 | Hexagon socket wrench | |
| 27 | Locking Knife Mount One | |
| 28 | A set of blades (including a set of sprocket, Latin, and wrench) | |
| 29 | Nut set | |
| 30 | 6-inch flat-nose pliers, 1 piece | |
| 31 | Large Cross Screwdriver | |
| 32 | Programming Manual | |
| 33 | Operation Manual | |
| 34 | Leveling Adjustment Pads | |
| 35 | Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller is responsible for free installation, adjustment of the equipment, and on-site free training for the operation and maintenance personnel at the Buyer's location.
4.2 Technical Support: The Seller provides effective technical support and can adjust machine tool parameters according to the product characteristics required by the Buyer.
4.3 Warranty Period: After the machine tool is accepted, a 12-month free warranty is provided. During the warranty period, free parts and services are offered, with timely and effective service.
4.4 Service Time Commitment: The seller promises that the after-sales service personnel will arrive on-site to handle the machine tool failure repair within 24 hours of receiving the repair report.
4.5 Post-warranty technical support: Within two years after the warranty expires, the seller provides free software technical consulting services. In case of any failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller shall continue to supply the buyer with discounted wear-and-tear repair parts, with the repair parts being provided to the buyer at the seller's procurement cost price.
Machine Tool Acceptance:
5.1 Receiving Standards: To be conducted according to technical requirements and parameters.
5.2 Receipt Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a preliminary acceptance. Check the geometric and positioning accuracy, process standard samples, and verify the processing accuracy and range. Only after the inspection is passed and both parties sign, can the shipment proceed.
5.2.2 Inspection results are to be determined by the final acceptance.
Manufacturer's Documents:
| Serial Number | File Name | Quantity |
| 1 | Machine accessories list | 1 |
| 2 | Factory Inspection Sheet | 1 |
After-sales Service:
1. One-year warranty for product quality issues from the date of goods delivery.
2. If the unit is used, any non-natural damage caused by improper use or modification is not covered under the above warranty, and the user must bear the repair costs.
