| Appearance Dimensions | Dimensions are custom-made based on the actual air volume handled. |
| Main Material | SS41/SUS304 |
| Housings Panel Thickness | Surface reinforced design |
| Total Warehouse Inventory Quantity | 1-N Warehouse (Number of warehouses can be changed) |
| Filter Bag Plate | Processed with laser cutting (ensuring no fine dust leakage) |
| Body Painting | 1. Boards are pickled and then subjected to painting and baking treatments; an epoxy acid and alkali-resistant lining is applied according to process requirements. 2. Sandblasting Treatment - Perform Epoxy acid and alkali-resistant lining as per process requirements. |
| Inlet design | Side entry and exit or bottom entry and top exit (depending on the actual site conditions) |
| Method of dust collection | Each warehouse is designed with an independent feeding port (including manual/automatic feeding valve + pressure plate ash bucket, no downtime required). |
| Filter Bag Size | Standard Sizes: DN130mm, DN140mm, DN150mm; Filter Bag Length: 800mm - 4800mm |
| Filter Bag Material | Spunbond Polyester Media with P.T.F.E. Coating, Static-Dissipative Treatment |
| Filter Media Operating Temperature Range | Between 40°C-280°C, select different filter bag materials based on actual operating temperature. |
| Filter Precision: | 99.98%@0.5-5micron |
| Process Flow: | Process powder collection - > Large particle sedimentation - > Fine dust filtration - > Pulsed backwashing - > Dust centralized packaging and handling - > Standardized emissions |
| Pulse compressed air requirement | 90-100 psig or 6-7 kgf/cm² |
| Standard Configuration: | Filter Cartridge + Venturi Tube + Triangular Bracket 2. Solenoid Valves & Diaphragm Valve Sets 3. Backflushing Sequence Controller/PLC Program Controller 4. Pressure Differential Indicator Device 5. Slider type ash hopper |
| Option Configuration | Spiral Feed Valve 2. Rotating Discharge Valve 3. Double-section automatic feeding valve 4. Pneumatic single-section gate valve 5. Pneumatic butterfly valve 6. Powder Level Indicator 7. Bridge Demolition Equipment 8. Reverse Wash High-Pressure Air Pressure Insufficient Monitoring Alarm 9. Automatic Differential Pressure Transmitter (4-20mA Transmission) 10. Various mechanical vacuum gauges 11. Bursting Discs, Explosion Relief Valves, Pipe Fire Valves 12. Chimney Dust Emission Monitor 13. Temperature/Pressure Sensor |
| Photovoltaic Industry Applications | TFT, CCL, TOP-CON, HJT, etc., POLY/PECVD/VCD coatings, silane combustion tubes, slicing, filtration, crystal pulling, graphite boat cleaning, etc., for solar cell factories, slicing factories, crystal pulling factories, and high-efficiency module factories. |
