Climbing net has been widely applied.

 In高空operations,Climbing Frame NetNot only does it protect the safety of construction workers, but it also serves as a fire-retardant and noise-reduction solution. Therefore, climbing mesh has gained widespread application.

At the height of the construction siteIt is necessary to have suspended guardrails below construction sites; when the height of the building exceeds 4 meters, it is essential to gradually set up guardrails in conjunction with the walls, with a fixed guardrail placed every 4 meters; the guardrails must be installed on the frames, bridge frames, and upper and lower holes. The climbing frame's net should be low and high, with the difference in the extended part approximately 5 months.

Unbreakable and unbendable support rodThe gap between the net and the wall is less than 15 cm; the outer spacing between the point and the lower object should be greater than the diameter of the support, guard rail, or wooden stick used when the device is 3 meters high. The diameter of the guard rail should not be less than 7 cm, the bamboo pole should not be less than 8 cm, and the spacing between bamboo poles in the climbing net should not exceed 4 meters.

Ancient timesOn construction sites, frequent occurrences of workers and construction projects collapsing are a common issue. Ultimately, this problem is on the rise, with increasing levels of danger, and the web of complications is expanding accordingly. It can be said that...Ladder NetSafety enhanced for construction workers, effectively addressing the fear of heights at high altitudes. Ultimately, efficiency is a must. Worry not, as productivity has significantly increased as well.