Siemens SKD60, 62+ Electric Water Valve Steam Valve

Electric hydraulic valve actuators SKD32...SKD82...SKD62...SKD60
20 mm travel
• SKD32...: Operating voltage is AC 230V, three-position control signal
• SKD82...: Operating voltage is AC 24V, three-position control signal
• SKD6…: Operating voltage is AC 24V, DC 0-10V, 4-20mA or 0-1000Ω valve signal
• SKD6...: Selectable flow characteristics, valve position feedback, stroke adjustment, LED status indication, priority control
• SKD62UA: Featuring sequential control with selectable action direction, stroke limit control, adjustable starting point and stroke range, as well as additional freeze protection monitoring signals QAF21... and QAF61...
• Drive force up to 1000 N
• With or without spring return function
• Directly mounted on the valve, no adjustment required
• Features manual adjustment and position indication
• Functionality can be enhanced with additional auxiliary switches, potentiometers, valve stem heaters, and stroke inverters.
• SKD...U with UL Certification
Application
For Siemens two-way and three-way valves of series VVF...、VVG…、VXF… and VXG..., featuring a drive stroke of 20 mm, applicable in HVAC systems as control valves or safety shut-off valves.
Engineering Precautions
The electrical connection of the actuator must comply with local electrical installation regulations and internal wiring diagrams. To ensure personal and property safety, it is mandatory to adhere to the corresponding safety regulations and restrictions! An ASZ6.5 rod heater must be used when the medium temperature is below 0°C to prevent valve freezing. For safety reasons, the rod heater is designed for AC 24V/30W.
The actuator bracket and valve stem cannot be separated to ensure air flow. Do not touch hot components without protection to avoid burns.
Failure to comply with the above suggestions may result in accidents or fires.
Recommendation: Strongly recommend isolating the valve when the temperature exceeds 140 °C.