Photovoltaic power generation grid

Specs for solar photovoltaic power generation grating:

Solar photovoltaic grid panels come in a rich variety of colors and are available in several specifications based on their working conditions. Different sizes correspond to varying usage intensities, and the size also greatly relates to the installation location. When selecting fiberglass grid panels, always choose carefully according to their specification parameters.

(1) The specification 25 solar photovoltaic grid refers to a product cell size of 25×38×38mm; weight is approximately 12.58 kg/square meter, with a carrying capacity of around 1 ton.

(2) The specification of 38 for solar photovoltaic power generation grids refers to a product cell size of 38×38×38mm; weight is approximately 14.5 kg/square meter, with a load capacity of around 2 tons.

(3) The specification of 50 for solar photovoltaic power generation grids refers to a product cell size of 50×50×50mm; weight of 23 kg/square, load capacity of 5-6 tons

Ideal for applications in industries such as oil, petrochemicals, electronics, power, papermaking, dyeing, electroplating, offshore exploration, and wastewater treatment, these work platforms, equipment platforms, drilling platforms, and walkways are perfect for corrosive environments and are also suitable for civil building facilities.

Installation Guide for FRP Grating Panels for Photovoltaic Power Stations

1. Tool Selection: Cutting can be done using ceramic or silicon carbide cutting disks. We can cut to the desired size free of charge upon customer specification during the order process.

2. Tool Fixation: Securely fasten the tool when using a heavy-duty cutting machine to prevent movement of the grate and the cutting machine.

3. Safety Protection: Before cutting, operators must wear protective eyewear, masks, gloves, and work clothes. Choose a well-ventilated, well-lit area for cutting. There is a lot of dust, so always remember to wear a mask.

4. Grille Placement: Cutting after placing the grille bottom-side up reduces the generation of debris.

5. Size Verification: Please consider the width of the blade saw kerf before cutting. The length and width deviation of the cut grid after cutting is -6mm to 0mm; the diameter deviation of the circular size is -9.5mm to 0mm.

6. Post-cutting Treatment: The cut surface must be coated with a resin that exceeds the grade of resin used for grating, to prevent corrosive agents from attacking the internal glass fibers.

Glass fiber reinforced grating production specifications are produced based on the demand in the fundamental market. Firstly, if there is a need for this product with special requirements, it requires time for pre-ordering, and the manufacturer needs to produce according to the actual specifications requested by the customer. Secondly, if the manufacturer is to assist with cutting, the dimensions must be prepared in advance and provided to the manufacturer together, to ensure that there is no extensive waste when the product is used.