Chain Conveyer

Chain ConveyerCauses of supply chain disruptions for manufacturers typically include the following scenarios:

1. Design selection errors or calculation mistakes, resulting in the chosen chain not meeting the required working tension for normal operation.

2. Chain manufacturing quality does not meet design requirements; allowable load is lower than the selected number.Value.

3. The cotter pin on the chain has worn out and was not replaced in time, leading to the pin's detachment and the chain breaking.

4. Large pieces of hard materials or ironwork are mixed into the conveying material, causing the chain to suddenly jam and overheat, ultimately breaking.

5. During the full machine installation, an unintentional shift or due to vibration and impact, there may be significant vertical and horizontal misalignment at the connection flanges and guide rails between the machine housing.Chain ConveyerThe chain broke due to overloading and being jammed.

Ideal for concentrating material from multiple points to a single location. The supply point can consist of one or several, and the material tube can accommodate one or more branches. Not only can materials from multiple points be sequentially transported and unloaded to the discharge point, but materials from multiple supply points can also be simultaneously transported to the discharge point. Under vacuum, materials are easily drawn in, making the feeding at the throat simple. The hopper can be open, allowing for continuous feeding and transportation. Material transport under vacuum facilitates moisture evaporation, making it easier to handle materials with high moisture content compared to pressure feeding; for materials supplied in a heated state, transportation can act as a cooling process. Components must maintain a sealed state, with the construction of components like the separator, dust collector, and lock-gas valve being relatively complex.Pneumatic ConveyingThe fan is installed at the system's end, requiring high air purification levels.