Original E6810 Crystal Wash Car Fluid Raw Material, Dust and Static Electricity Proof Crosslinked Luster Agent

New-Generation Crystal Wash Car Detergent – Wash and Protect in One

Lokker's new-generation crystal wax car wash combines cleaning and protection. Unlike traditional car washes, the new-generation crystal wax car wash features modified silicone-oxygen compounds that strongly adhere to the car's paint surface, achieving hydrophobic effects. Meanwhile, the car wash incorporates silicon resin of modified high-molecular-weight polymers with a highly cross-linked mesh structure, effectively repairing damaged paint and imparting a high-gloss finish. Additionally, the chemical bond properties of the high-molecular-weight polymer far exceed the energy of ultraviolet rays, thereby effectively and durably protecting the car's paint from UV damage.

Water slides off the glass quickly, ensuring safe driving in rainy weather.

Water droplets roll smoothly on the car paint, and during driving, they can quickly slide off, preventing the focus of high heat from sun rays after rain, which can damage the car paint, or the corrosion caused by other pollutants on the car paint.

Crystal Coating Car Wash Instructions

ISLAND333 Silicon Resin Coating Car Wash Liquid

1) Clean most of the mud off the body with a high-pressure water jet.

2) Dilute ISLAND333 silicone resin 100 times with water, shake well, then apply it to the car body with a foaming sponge to create rich foam for further dirt removal.

3) Rinse the car body with clean water after washing to remove the detergent; during the rinse, you'll notice the distinct water-repellent effect.

4) After washing, wipe the body of the vehicle with a clean and dry cloth to remove any remaining water droplets.

Regarding the dilution factor: It can be diluted 100 times, and higher dilution factors can be used. However, as the dilution factor increases, the water-repellent effect will gradually weaken. You can test and dilute to the desired factor and water-repellent effect.

Note: After washing, the car body must be dried with a clean cloth to prevent water stains; drying with a cloth will not affect the waterproofing effect.