Tin Ore Equipment - Sawtooth Wave Jig Machine

Introduction to Sawtooth Wave Jigging Equipment

The toothed wave jig is one of the main equipment for gravity separation. It is highly effective due to its large working capacity, wide particle size distribution coverage, and high utilization rate. It is widely used in the metallurgical industry for mining operations and gold extraction on ships, including the separation of gold, tin, tungsten, lead, zinc, antimony, manganese, diamond, and copper ores. The JT4-2 and JT1.5-2 models of the toothed wave large particle jig in this category can handle feed particle sizes up to 30MM, with options for overflow and underflow screening. The toothed wave jig is also used in beneficiation plants for barite, manganese, copper, and other iron ores, offering advantages such as a wide range of feed particle size distribution and significantly reduced underflow water flow.

Traditional jigging machines are commonly driven by a circular shaft, and their jigging pulsation liquid curve often exhibits a sine wave pattern. This is because the rising and falling of water flow speed and efficiency caused by the diaphragm's motion are generally consistent, which is unfavorable for the loosening of the jigging material layer and the proportional stratification of mineral particles. Consequently, this can harm the separation ratio and utilization rate of the zigzag wave jigging machine equipment.

The sawtooth wave jigging machine is an environmentally friendly and energy-saving reselection equipment developed and improved based on the stratified regularity of the jigging material layer theory, on the basis of traditional jigging machines. Its jigging pulse liquid curve is sawtooth-shaped, allowing the rising water flow to be faster than the descending water flow: short gain values, long descending times; it eliminates the drawbacks of the sine wave pulse liquid curve, such as equal rising, descending water flow, and efficiency time in the jigging machine, improving the looseness of the material layer, reducing the intake function, and allowing the heavy mineral particles in the minerals to achieve sufficient sedimentation, further enhancing the separation ratio and utilization efficiency of the sawtooth wave jigging machine. Compared to sine wave jigging machines, it improves: Sn 3.01%, W 5.5%, Pb 1.63%, Zn 2.04%; water consumption is reduced by 30%-40%, and land occupation is reduced by one-third, and it is four-stroke adjustable due to the electromagnetic induction adjustment of the motor for dragging, allowing the stroke to be infinitely adjustable. The characteristics of the sawtooth wave jigging machine reach the high standard in China and is one of the most ideal environmentally friendly and energy-saving reselection machines currently available.

Advantages and Characteristics of the Toothed Wave Jig Machine

1 High work ability, wide coverage of particle size distribution;

High concentration ratio and high utilization rate;

Easy to install, easy to operate, and easy to maintain.

4 The zigzag wave pulsating beverage curve makes heavy minerals easily settle down.

Saves up to 30-40% water compared to traditional jigging machines.

Select a variable-frequency electromagnetic motor.

The 7-toothed wave jig is suitable for separating sand gold, tin, titanium, hematite, copper ore, coal, and other minerals, particularly widely used in the manganese ore and barite powder beneficiation industry.