In order to ensure the safe operation of the new 250A gasoline generator welding machine, the no-load voltage cannot exceed 80V. This way, when starting welding work, due to the increase in current, a voltage drop occurs, which can maintain the working voltage within 30V. Therefore, the working characteristics of AC welding machines show a "steep drop" curve trend, and the advantage of this characteristic is that it can adjust the current to meet the welding requirements of different welding thicknesses and metal materials. Due to the constantly changing working environment and numerous unsafe factors on actual construction sites, especially before arc initiation and when replacing welding rods, there is a great threat to operators. Therefore, after mastering the working principle of the above-mentioned power generation welding machine, it is necessary to provide grounding protection for the power generation welding machine to maximize the protection of workers and reduce injuries and losses caused by improper operation.
Model: SHU250
Power generation welding machine
Rated power: 7KW
Backup power: 7.5KW
Rated frequency: 50HZ
Rated voltage: 220V
Power factor: 1.0
Number of phases: single-phase
Welding machine parameters
Welding module: automatic welding module
No load voltage (V DC): 60-70V
Welding voltage: 22-35V
Power generation welding machine power: 7KW
Welding rod range: 0-5.0mm
Current regulation: 0-250A
Welding machine grade: industrial grade
Welding continuity rate: 100%
Welding current: inverter DC welding machine
engine parameters
Engine model GX390 Honda Power
Engine type: Single cylinder air-cooled engine
Piston displacement: 389CC
Power speed: 13HP/3600kpm
Startup method: manual startup
Lubricating oil volume: 1.5L
Fuel consumption 15L/H
Fuel type: gasoline
Other parameters
Unit size: 600 * 505 * 550
Motor type: Rare earth permanent magnet motor
Structure type: Open frame type
Noise level at 7M, 68
Fuel tank capacity: 6.5L
Welding efficiency: 110%
Net weight: 60
The standard configuration of the generator welding unit is as follows
Voltage, welding current regulation, frequency, machine operation indication, cooling fan, safety protection:
Start the battery and the battery starting connection cable;
Welding rod functions: 506, 507, ordinary welding rod, cellulose welding rod, alkaline welding rod, low hydrogen welding rod, carbon welding rod, stainless steel welding rod, etc.
Usage conditions: Environment -35-55 degrees Celsius: altitude within 2000 meters.
Honda gasoline engine: dustproof, sand proof, shock resistant, and has good environmental adaptability!
Auxiliary power: 5KW/50HZ auxiliary power output, can be equipped with lighting, handheld drill, water pump, etc.
Optional accessories (additional cost)
Remote start or electric start device TO high-power version rare earth permanent magnet motor
High altitude carburetor 3000-7000 meters high power version TO engine
Execution standard: International standard certification ISO9001:2000 Industry execution standard GB/T2820.1997
After sales service: Daze Sunwei introduces to you all types of generator sets and generator welding sets purchased from Daze Power. We will make the following warranty commitments to all purchasing customers:
If there is a product quality problem that cannot be repaired within seven days after shipment, except for quality problems caused by improper use by the customer, a new product can be replaced unconditionally.
If there are quality problems within three months of sales, except for those caused by improper customer operation, if the customer can repair them themselves, they will send out the required parts for replacement free of charge. If they cannot repair themselves, they can be sent back to the factory for repair.
3. Customers should strictly follow the instructions for correct use and maintenance during use. Within three months, if it is a product quality issue, we will be responsible for all parts and repair costs; If the problem is caused by improper use or after three months, the customer is only responsible for the accessory and shipping costs. So as to ensure that you have no worries.
4. All machines sold by our company are free to be debugged and trained for their operators to use;
5. The units sold are entitled to one year of free maintenance and repair services from the date of sale (excluding normal wear and tear parts).
6. After the warranty period, provide long-term spare parts and maintenance services.
