Hot selling 300A gasoline powered welding machine

Welding operators must wear insulated gloves, insulated shoes, and white work clothes, use goggles and face shields, and wear safety belts when working in high-altitude hazardous areas. Before welding, check whether the welding handle and circuit are well insulated. After welding, turn off the power by disconnecting the switch. Fire extinguishing equipment must be equipped during welding operations, and there should be a dedicated person to supervise. After completing the homework, sufficient time should be left to observe and confirm that there are no ignition points before leaving. When welders perform welding inside metal containers, underground, in trenches or narrow ditches, in damp areas, etc., a supervisor should be appointed. Their guardians must be diligent and responsible, stick to their work posts, and be familiar with welding operation procedures and emergency rescue methods. The power supply voltage for lighting should not exceed 12V. Sufficient lighting should be provided for night work or welding in dark places; There should be ventilation or smoke suppression equipment when operating in the workshop or container.

Welding face mask is a covering tool used to prevent welding spatter, arc light, and other radiation from damaging the face and neck of welders. Commonly used face masks include handheld face masks and helmet style face masks. And helmet style face shields are divided into three types: ordinary helmet style face shields, enclosed and isolated air supply welder helmet style face shields, and gas transmission protective welder helmet style face shields. Welding refers to the method of connecting two separated metal objects (of the same or different metals) into a single entity by forming atomic (or molecular) bonds through appropriate physical and chemical processes. Cutting is an indispensable cutting process in welding operations, which is a processing method that divides the entire piece of material into the required shape and size.

Model: SUH300

Generator parameters

Rated power: 5KW

Backup power: 6KW

Rated frequency: 50HZ

Rated voltage: 220V

Power factor: 1.0

Number of phases: single-phase

Welding machine parameters

Welding module: automatic welding module

No load voltage (V DC): 60-95V

Welding voltage: 22-35V

Welding rod range: 0-7.0mm

Current regulation: 0-300A

Welding machine grade: industrial grade

Welding continuity rate: 100%

Welding current: inverter DC welding machine

engine parameters

Engine model GX690 Honda Power

Engine type: Dual cylinder air-cooled engine

Piston displacement: 688CC

Power speed: 21HP/3600kpm

Starting method: Electric start

Lubricating oil volume: 1.9L

Fuel consumption 3.5L/H

Fuel type: gasoline

Other parameters

Unit size: 935 * 620 * 650

Structure type: Open frame type

72 at a noise level of 7M

Fuel tank capacity: 37L

Battery: 12V-24Ah

Net weight: 140/160

The standard configuration of the generator welding unit is as follows

Voltage, welding current regulation, frequency, machine operation indication, cooling fan, safety protection:

Start the battery and the battery starting connection cable;

Welding rod functions: 506, 507, ordinary welding rod, cellulose welding rod, alkaline welding rod, low hydrogen welding rod, carbon welding rod, stainless steel welding rod, etc.

Usage conditions: Environment -35-55 degrees Celsius: altitude within 2000 meters.

Honda Power gasoline engine: dustproof, sand proof, shock resistant, and has good environmental adaptability!

Auxiliary power: 5KW/50HZ auxiliary power output, can be equipped with lighting, handheld drill, water pump, etc.

Optional accessories (additional cost)

Industrial grade TO rare earth permanent magnet motor for argon arc welding machine

Remote control starting device TO inverter DC argon arc welding machine

High altitude carburetor 3000-7000 meters high power version TO engine

Execution standard: International standard certification ISO9001:2000 Industry execution standard GB/T2820.1997

Oubao Sunwei reminds you that during the warranty period, we provide "three guarantees" service for the supplied goods:

1: Three Guarantees: During the warranty period, the product is covered by warranty for repair, replacement, and return according to the responsibility for product quality accidents.

2: Three guarantee period: Within 12 months after the customer installs, debugs, uses, and maintains the supporting unit products according to the technical conditions and instructions.

3: Three guarantee service: During the three guarantee period, if the product malfunctions due to quality, resulting in component damage and affecting performance indicators, our company is responsible for handling the "three guarantees".

Note: After the expiration of the "three guarantees" of the product, the company will provide lifetime cost maintenance services.