Luminous Roadway Solution Technology

Photoluminescent paint application: Pattern thickness is2-3MM

The dry ground should be swept clean and coated with a layer of sealing primer.

② Use a brush/Coat the required area with white undercoat using a roller or a spray machine (apply at least 2 coats). Thickness: 0.5-1mm

③ Pending2 hours, allow the white primer to harden and dry. Then, mix the transparent resin with the waterproof, self-illuminating powder evenly to create the glow-in-the-dark mixture. Apply the first coat of glow-in-the-dark paint to the white primer by brushing or spraying.

④After 2 hours, when the glow-in-the-dark paint has set, apply the second coat of glow-in-the-dark paint by brushing or spraying (at least two more coats). Thickness: 1mm

After the luminescent layer dries, apply a transparent protective agent by rolling.