Yinteng Explosion-proof Chilled (Hot) Water UnitProduct Specifications
Specification: 6 HP
Brand: YingTeng
Cooling Capacity: 18.0 kW (15.5 × 10^3 kcal/h)
Power: 380V/3ph/50Hz
Total Power: 6.5 kW
Rated Current: 12.2A
Compressor Type: Scroll
Power: 5.1 kW
Pump Power: 0.75 kW
Flow Rate: 33m
Flow Rate: 3.1 m³/h (51.7 L/min)
Tank Capacity: 70L
Assume Size DN25
Noise: 62 dB(A)
Airframe Weight: 210 kg
Dimensions: Length 815mm, Width 750mm, Height 1480mm
Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb
Note: The above technical specifications are for reference only; the physical unit is the standard.
The above cooling capacity is based on an ambient temperature of 35°C, an inlet water temperature of 12°C, and an outlet water temperature of 7°C.
Customizable Industrial Low-Temperature Chilled Water Units: - -5°C Air-Cooled Low-Temperature Industrial Chilled Water Unit - -5°C Air-Cooled Low-Temperature Industrial Chilled Water Unit - -15°C Air-Cooled Low-Temperature Industrial Chilled Water Unit - -35°C Air-Cooled Low-Temperature Industrial Chilled Water Unit
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Yinteng Explosion-proof Chilled (Hot) Water UnitThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Inten Explosion-Proof Chilled (Hot) Water UnitOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
YingTengExplosion-proof Cold (Hot) Water Chiller UnitSeries models are processed with special explosion-proof technology, suitable for widespread use in flammable and explosive areas of Zones 1 and 2, and are widely applicable in scientific research, oil, chemical, pharmaceutical, and power plant environments where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures that pose explosion hazards.Explosion-proof Cold (Hot) Water Chiller UnitIdeal for facilities requiring temperature control.Explosion-proof Cold (Hot) Water Chiller UnitInspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, with explosion-proof certification and explosion-proof CCC certificate issued; featuring an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance, the entire seriesExplosion-proof Cold (Hot) Water Chiller UnitInternally equipped with brand-name compressors, microcomputer intelligent control, digital display, featuring low noise, stable performance, simple operation, and safety, it is highly favored by the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-mounted air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof corrosion-resistant air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioners, and explosion-proof multi-split air conditioners, etc.).
Inten Explosion-Proof Chilled (Hot) Water UnitProduct Features
International brand compressors, optimized rotor structure, stable quality, reliable operation.
External expansion valve, precise control, excellent refrigeration effect.
High-efficiency heat exchangers with superior heat transfer performance, featuring a unique design of cold and hot circulation partition plates.
High-quality liquid storage device, optimizes system operation, stable working condition.
High airflow, low noise, external rotor series axial flow fans, powerful air volume.
High-head, low-noise stainless steel pumps from international brands, stable quality.
High-efficiency internal thread tube finned heat exchangers, featuring unique turbulent flow windowed fin design, to enhance heat exchange efficiency.
Microcomputer controller with analog input/output, for precise control of the unit's temperature.
YingTengExplosion-proof Cold (Hot) Water Chiller UnitA series of chillers, produced with years of industry experience and continuous optimization, offering a range of high-quality chillers. The full lineup utilizes internationally renowned brands such as Copeland, Danfoss, Panasonic, Daikin compressors, including scroll, reciprocating, screw, semi-hermetic, and hermetic types. The complete set is equipped with high-efficiency copper tube fins, industrial stainless steel condensers, and evaporators, with materials reaching industrial food-grade quality. Electrical components are from world-renowned brands like Siemens, Schneider, and ABB. Reliable quality and exceptional performance. The Yinteng explosion-proof chillers boast compact size, low noise, high energy efficiency, long lifespan, and easy operation. Multiple refrigerants are available for selection, meeting low-temperature and special environment requirements.
The cooling machine control section utilizes a high-precision main control panel developed by Yingteng, a PLC programmable controller, a human-machine interface, and full Chinese display. It achieves full-process, fully automatic computerized adjustment and control, making the unit control more precise and reliable.
YingTengExplosion-proof Cold (Hot) Water Chiller UnitCompact structure, small footprint, lightweight, easy to transport. Balanced operation for safety, low vibration, no need for complex foundations, easy installation. Automatic protection features: high/low pressure protection, compressor protection, motor overload/overheat protection, anti-freezing protection, water cut-off protection for cold water/cooling water, temperature-sensitive fusible plug, safety valve.
