Our statically loaded probe, widely used in the geotechnical survey industry, is an in-situ testing machine. Its function is to press the probe (available in single-bridge and double-bridge configurations) into the soil layer, measuring the soil's penetration resistance with a resistance strain gauge or a static probe microcomputer.(Single Bridge)Or separately measure the cone tip resistance and side wall friction (double bridge), conduct mechanical stratification of soil layers, estimate the plastic state or compactness, strength, compressibility, foundation bearing capacity, single pile bearing capacity, pile driving resistance, and perform liquefaction discrimination. If equipped with a worm gear box and a cross-plate sensor (for cross-plate tests), it can also determine the undrained shear strength and sensitivity of saturated soft clay. The static probe micro-machine, compatible with the static probe machine, can automatically collect data on foundation soil, print data tables, graphs, friction ratios, and single pile bearing capacities, and can communicate with general-purpose microcomputers. Suitable for testing in soft soil, general clay, silt, sand, and soils containing a small amount of gravel. Especially applicable in the engineering survey industries of construction, highways, railways, bridges, water conservancy, and electricity. It offers advantages such as low cost, quick returns, and low labor intensity for operators.
Key Technical Parameters
1Transportation Type: Four-wheel steering manual driving walking2Drive Type: Rear Drive
3Turn Radius: ≤4m
4Power:1110Type Electric Start Diesel Engine,RPM:2200-2600r/min
5Anchor Type: Manual anchoring or rack-type automatic anchoring.
6Penetration speed:0.8-1.2m/min Rated Penetration Force200KN，
7Lifting speed:2.5m/min Lift Capacity220KN
8Operating Medium:46#Hydraulic oil9System Oil Pressure:14Mpa
10Fuel Tank Capacity:80L 11Card slot push-in and pull-out
12Walking Speed: 25-40（km/h） 13Volume: 3.5*1.8*1.5(M)
14Net Weight:Manual anchoring2tons automatic anchor3.5tons15Operating Temperature:-10C O—40CO
